HOUSINGS AND ACCESSORY PRODUCTS

DESCRIPTION

A screw-in, cartridge-style, push and release type hand pump with two built-in checks.

OPERATION

The HP10-20 will provide a specific displacement of oil to port ➀.

Note: As with any mechanical hydraulic actuator (piston rods, rotating pump shaft,

etc.) the shaft will become coated with a minute amount of oil from the internal high

pressure system. The rod protruding from the hand pump may feel damp with oil after

use. This is desirable because the oil coating serves to lubricate the shaft seal, reduc-

Operating Pressure: Port ➀ to 207 bar/3000 psi; Port ➁ to 69 bar/1000 psi

Displacement: 1.36 cc/0.083 cu. in. per stroke

Force Required: 30 lbs. to attain 17 bar/250 psi

Internal Leakage: From port ➀ to port ➁: 0.15 cc/3 drops per minute maximum

at 207 bar/3000 psi

Temperature: -40 to 120°

Filtration: See page 9.010.1

Fluids: Mineral-based or synthetics with lubricating properties at viscosities

of 7.4 to 420 cSt (50 to 2000 sus)

Installation: No restrictions; See page 9.020.1

8.550.1

HYDRAFORCE

.com

Seals

N Buna N

V Fluorocarbon

Porting

0 Cartridge Only

6T SAE 6

8T SAE 8

2B 1/4 in. BSP*

3B 3/8 in. BSP*

4B 1/2 in. BSP*

Zinc-plated exposed surfaces.

Buna N O-rings and polyester

elastomer back-ups standard.

Anodized aluminum knobs.

0.16 kg. (0.35 lbs.) Anodized high-

strength 6061 T6 aluminum alloy,

rated to 207 bar (3000 psi). Ductile

iron bodies available; dimensions

may differ. See page 8.010.1