PRESSURE CONTROLS
PS10-31 Sequence, Internal Pilot & Drain
DESCRIPTION
A screw-in, cartridge-style, direct-acting, spool-type, hydraulic sequence valve with
internal pilot and spring chamber drain, designed to direct fl ow to a secondary circuit
once a pre-determined pressure level is attained in the primary circuit.
OPERATION
In its steady state, the PS10-31 blocks fl ow at ➀, while allowing fl ow to pass from
➁ to ➂.
On attainment of a pre-determined pressure at
➀, the cartridge shifts to open ➀ to ➁.
FEATURES
• Adjustments cannot be backed out of the valve.
• Adjustments prohibit springs from going solid.
• Spring range to 240 bar (3500 psi).
• Hardened spool and cage for long life.
• Industry common cavity.
RATINGS
Operating Pressure: 240 bar (3500 psi)
Flow: See Performance Chart
Internal Leakage
➀ to ➁: 82 cc/minute (5 cu. in./minute) max.
to 85% of nominal setting
Standard Spring Range: 35 to 240 bar (500 to 3500 psi)
Temperature: -40 to 120°C with standard Buna seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-3; See page 9.110.1
Cavity Tool: CT10-3XX; See page 8.600.1
Seal Kit SK10-3X-BB; See page 8.650.1
USASI/ISO:
PERFORMANCE (Cartridge Only)
SYMBOLS
6.520.1
27.6/400
34.5/500
41.4/600
48.3/700
20.7/300
13.8/200
6.9/100
7.5
2
FLOW RATE lpm/gpm
PRESSURE RISE bar/psi
Flow Characteristic to
32 cSt/150 sus oil at 40°C
15.1
4
22.7
6
30.3
8
37.9
10
➁➂
207/3000
172/2500
241/3500
138/2000
103/1500
69/1000
34.5/500
7.5
2
FLOW RATE lpm/gpm
PRESSURE RISE bar/psi
Flow Characteristic to
32 cSt/150 sus oil at 40°C
15.1
4
22.7
6
30.3
8
37.9
10
➀➁
MAX.
MIN.
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.