PRESSURE CONTROLS
HTD10-40 Torque Divider
ISO SYMBOL
PERFORMANCE
(Cartridge Only)
6.480.1
DESCRIPTION
A high pressure, spool-type, screw-in, cartridge-style, hydraulic pressure reducing/
relieving valve that maintains the control port pressure at the midpoint of the supply
port pressure.
OPERATION
The spool of the HTD10-40 is biased to block flow from port 2 to 3 and allow flow from
port 3 to 4. Pressure applied to port 2 shifts the spool to block flow to port 4 and allow
flow from 2 to 3 until the pressure at 3 is at the midpoint of the pressure at 2 and port
4. The valve relieves flow from 3 to 4 if the pressure at 3 increases above the midpoint.
Port 1 is blocked (unused).
FEATURES
• Divides torque between two series motors.
• Accomodates differential flow (size optimized).
• Cost-effective.
• Hardened spool and cage for long life.
• All HyPerformance™ products are tested to the rigorous standards of the NFPA
specification T2.6.1.
• All HyPerformance™ valves are tested at a verification level of 90% and an
assurance of 99%.
RATINGS
Operating Pressure: 350 bar (5075 psi) all ports; 10% life cycle 420 bar (6090 psi)
Note: All HyPerformance products are tested for 900K cycles at 350 bar and 100K
cycles at 420 bar.
Proof Pressure: 690 bar (10000 psi)
Burst Pressure: 1380 bar (20000 psi)
Flow Rating: 56.8 lpm (15 gpm)
Control Pressure Setting: Midpoint of supply and tank pressure. See performance
chart.
Maximum Internal Leakage: 1.95 lpm (0.52 gpm) at 350 bar (5075 psi)
Temperature: -40 to 100°C (-40 to 212°F) with standard Buna seals;
-26 to 204°C (-15 to 400°F) with fluorocarbon seals;
-54°C to 107°C (-65°F to 225°F) with urethane seals.
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC10-4; See page 9.110.1
Cavity Tool: HCT10-4XX; See page 8.600.1
Seal Kit: SK10-4U-000 (urethane); SK10-4N-BMM (Buna); SK10-4V-BMM
(fluorocarbon); See page 8.650.1
40
20
30
10
SUPPLY PRESSURE bar/psi
CONTROLLED PRESSURE
% of Supply Pressure
PERFORMANCE
Tank: <0.69 bar (10 psi)
Deadhead Condition
69
1000
138
2000
206
3000
276
4000
345
5000
50
60
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.