PRESSURE CONTROLS
RV10-23 Relief, Pilot-Operated
DESCRIPTION
A screw-in, cartridge-style, pilot-operated, two-stage, hydraulic relief valve intended
for use as a pressure limiting device in demanding hydraulic circuits which require
fast response, low hysteresis, low leakage and low pressure overshoot.
OPERATION
The RV10-23 blocks fl ow from ➀ to ➁ until suffi cient pressure is present at ➀ to
force the pilot stage open, allowing the main stage to shift, opening
➀ to ➁.
Note: The RV10-23 may be used in cross-over relief applications, however, it is not
recommended for use as in parallel cross-over relief or anti-cavitation applications.
Consult factory for proper fl ow path connections.
FEATURES
• Adjustments cannot be backed out of the valve.
• Hardened spool and cage for long life.
• Fast response.
• Industry common cavity.
RATINGS:
Operating Pressure Range: 20.7 to 240 bar (300 to 3500 psi)
Flow: 7.6 to 113.6 lpm (2 to 30 gpm)
Internal Leakage: 0.5 ml/minute (10 drops/minute) max. to 80% of nominal setting
Crack Pressure Defi ned: bar (psi) evident at 7.6 lpm (2.0 gpm) attained
Reseat Pressure: Nominal 90% of crack pressure
Pressure Rise: at 240 bar (3500 psi): 0.15 bar/lpm (8 psi/gpm)
Operating Temperature: with Buna N seals: -54 to 135°C (-65 to 275°F)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-2, Variation “A”; See page 9.110.1
Cavity Tool: CT10-2XX; See page 8.600.1
Seal Kit: SK10-2X-M; See page 8.650.1
USASI/ISO:
SYMBOLS
PERFORMANCE
(Cartridge Only)
6.060.1
276/4000
207/3000
172/2500
241/3500
138/2000
103/1500
70/1000
35/500
38
10
19
5
57
15
95
25
76
20
FLOW lpm/gpm
Δ PRESSURE bar/psi
114
30
Relief Pressure vs. Flow
32 cSt/150 sus oil at 40°C
276/4000
207/3000
172/2500
241/3500
138/2000
103/1500
70/1000
35/500
0.500.25 0.75 1.25
1.00
TIME seconds
Δ PRESSURE bar/psi
1.50
Dynamic Response
Test Conditions:
3500 psi/2.0 gpm Setting
15 gpm Disturbance Flow
Flow
x 100
Inlet Pressure
Note: This new model RV10-23 should be used instead of the
older model RV10-24 (page 6.062.1) which is being
discontinued. For applications where low-overshoot
and reverse free-fl ow features are required, see model
RV10-28 (page 6.170.1).
HYDRAFORCE
.com
®
U.S. Patent
7,069,945
Blue rectangles are links to other catalog pages.