PRESSURE CONTROLS
RV08-22 Relief, Differential Area Poppet
DESCRIPTION
A screw-in, cartridge-style, direct-acting, differential area, poppet-type hydraulic
relief valve for use as a pressure limiting device in more demanding hydraulic
circuits, requiring low hysteresis and low internal leakage.
OPERATION
The RV08-22 blocks fl ow from ➁ to ➀ until suffi cient pressure is present at ➁ to
force the poppet from its seat.
The cartridge offers smooth transition in response to load changes in common
hydraulic circuits.
NOTE: The RV08-22 may be used in cross-over relief applications (back pressure
on
➀) with the use of the “C” double back-up ring seal option. See Ordering Table.
FEATURES
• Adjustments cannot be backed out of the valve.
• Adjustment options A, B, and C: positive stops prevent springs from going solid.
• Hardened poppet and cage for long life.
• Optional spring ranges to 221 bar (3200 psi).
• Smooth response to pressure surges.
• Industry common cavity.
• Compact size.
RATINGS
Operating Pressure: 248 bar (3600 psi)
Flow: The Performance Chart illustrates fl ow handling capacity at maximum setting
for each spring range option. Pressure rise will vary with spring (range) and with
setting within range due to fl ow forces. Consult factory for specifi c fl ow
characteristic values.
Internal Leakage: 0.25 cc/minute (5 drops/minute) max. to 85% of nominal setting
Crack Pressure Defi ned: bar (psi) evident at 0.95 lpm (0.25 gpm) attained
Reseat Pressure: Nominal 90% of crack pressure
Standard Spring Ranges: Due to manufacturing tolerances, it may be possible to
fi eld-adjust the valve higher than the nominal ratings shown below.
Temperature: -40 to 120°C
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-2; See Page 9.108.1
Cavity Tool: CT08-2XX; See page 8.600.1
Seal Kit: SK08-2X-T; See page 8.650.1; SK08-2X-M (for cross-over relief application)
USASI/ISO:
SYMBOLS
PERFORMANCE
(Cartridge Only)
6.045.1
207/3000
172/2500
138/2000
103/1500
69/1000
7.5
2
15.1
4
FLOW RATE lpm/gpm
PRESSURE RISE bar/psi
Flow Characteristic
32 cSt/150 ssu oil at 40°C
22.7
6
35/500
30.2
8
HYDRAFORCE
.com
®
Spring Nominal Maximum Solid
Model Code Factory Rating Adjustment
4 3.4 – 27.6 bar (50 – 400 psi) 41.4 bar (600 psi)
7 6.9 – 62.1 bar (100 – 900 psi) 89.7 bar (1300 psi)
13 6.9 – 117.2 bar (100 – 1700 psi) 158.6 bar (2300 psi)
26 17.2 – 220.7 bar (250 – 3200 psi) 275.9 bar (4000 psi)
*35 17.2 – 248.3 bar (250 – 3600 psi) 275.9 bar (4000 psi)
*Spring Code 35 is available with factory pre-set (F and H) options only.
Blue rectangles are links to other catalog pages.