PRESSURE CONTROLS
RVD50-20 Relief, Poppet-Type, High Pressure
DESCRIPTION
A screw-in, cartridge-style, direct-acting, poppet-type, hydraulic relief valve intended
for use as a pressure limiting device for common hydraulic circuit protection.
OPERATION
The RVD50-20 blocks fl ow from ➀ to ➁ until suffi cient pressure is present at ➀ to
force the poppet from its seat.
The cartridge offers fast response to load changes in typical hydraulic circuits
requiring low hysteresis, low pressure rise and low internal leakage.
For cross-over applications, maximum recommended fl ow is 37.9 lpm (10 gpm)
and maximum pressure is 207 bar (3000 psi). See Ordering Table.
FEATURES
• Adjustments cannot be backed out of the valve.
• Height of the adjuster does not change when the pressure setting is adjusted.
• Adjustment options A, B, and C: positive stops prevent springs from going solid.
• Hardened poppet and cage for long life.
• Optional spring ranges to 345 bar (5000 psi).
• Rapid response to pressure surges.
• Industry common cavity.
RATINGS
Maximum Operating Pressure: 350 bar (5075 psi)
Flow: The Performance Chart illustrates fl ow handling capacity at maximum setting
for each spring range option. Pressure rise will vary with spring (range) and
with setting within range due to fl ow forces. Consult factory for specifi c fl ow
characteristic values.
Internal Leakage: 0.25 cc/minute (5 drops/minute) max. to 80% of nominal setting
Crack (Set) Pressure Defi ned: bar (psi) evident at 0.95 lpm (0.25 gpm) attained
Reseat Pressure: Nominal 85% of crack pressure
Standard Spring Ranges: Due to manufacturing tolerances, it may be possible to
adjust the valve either lower or higher than the nominal ratings shown below.
Model Code 08: 13.7 bar to 58.6 bar (200 psi to 850 psi)
Model Code 15: 41.4 bar to 103. 4 bar (600 psi to 1500 psi)
Model Code 24: 96.5 bar to 165.5 bar (1400 psi to 2400 psi)
Model Code 32: 137.9 bar to 220.6 bar (2000 psi to 3200 psi)
Model Code 42: 206.8 bar to 289.6 bar (3000 psi to 4200 psi)
Model Code 50: 275.8 bar to 344.7 bar (4000 psi to 5000 psi)
Storage Temperature: -40°C to 120°C with standard Buna N seals
-35°C to 204°C with Fluorocarbon seals
-54°C to 107°C with Polyurethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-2; See page 9.110.1
Cavity Tool: CT10-2XX; See page 8.600.1
Seal Kit: SK10-2X-B; See page 8.650.1;
SK10-2X-M for cross-over relief application – max. pressure 207 bar (3000 psi)
USASI/ISO:
SYMBOLS
PERFORMANCE
(Cartridge Only)
6.023.1
HYDRAFORCE
.com
®
207/3000
172/2500
138/2000
103/1500
69/1000
19
5
38
10
57
15
76
20
95
25
114
30
FLOW RATE lpm/gpm
DIFFERENTIAL PRESSURE bar/psi
Differential Relief Pressure vs. Flow
32 cSt/150 sus oil at 40°C
35/500
241/3500
276/4000
310/4500
345/5000
379/5500
Spring Option 24
Spring Option 15
Spring Option 08
Spring Option 32
Spring Option 50
Spring Option 42
Blue rectangles are links to other catalog pages.