PRESSURE CONTROLS
RV08-20 Relief, Direct-Acting Poppet
DESCRIPTION
A screw-in, cartridge-style, direct-acting, poppet-type, hydraulic relief valve intended
for lower fl ow circuits requiring low internal leakage.
OPERATION
The RV08-20 blocks fl ow from ➀ to ➁ until suffi cient pressure is present at ➀ to force
the spring-opposed poppet from its seat.
For settings over 228 bar (3300 psi), see model RV58-20.
Note: The RV08-20 may be used in cross-over relief applications (back pressure
on
➁) with the use of the “C” double back-up ring seal option. See Ordering Table.
FEATURES
• Adjustments cannot be backed out of the valve.
• Adjustment options A, B, and C: positive stops prevent springs from going solid.
• Optional spring ranges to 248 bar (3600 psi).
• Rapid response to pressure changes.
• Compact size.
RATINGS
Operating Pressure: 248 bar (3600 psi)
Flow: The Performance Chart illustrates fl ow handling capacity at max. setting
for each spring range option. Pressure rise will vary with spring (range) and
with setting within range due to fl ow forces. Consult factory for specifi c fl ow
characteristic values.
Internal Leakage: 0.25 cc/minute (5 drops/minute) max. to 75% of nominal setting
Crack Pressure Defi ned: bar (psi) evident at 0.95 lpm (0.25 gpm) attained
Reseat Pressure: Nominal 80% of crack pressure
Standard Spring Ranges: Due to manufacturing tolerances, it may be possible to
adjust the valve either lower or higher than the nominal ratings shown below.
Temperature: -40 to 120°C with standard Buna seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-2; See page 9.108.1
Cavity Tool: CT08-2XX; See page 8.600.1
Seal Kit: SK08-2X-B; See page 8.650.1; SK08-2X-M (for cross-over relief application)
USASI/ISO:
SYMBOLS
6.010.1
276/4000
207/3000
138/2000
69/1000
11.4
3
22.7
6
FLOW lpm/gpm
PRESSURE RISE bar/psi
Flow Characteristic
32 cSt/150 ssu oil at 40°C
Spring Nominal Maximum Solid
Model Code Factory Rating Adjustment
5 3.45 – 34.48 bar (50 – 500 psi) 48.28 bar (700 psi)
9 6.90 – 75.86 bar (100 – 1100 psi) 103.45 bar (1500 psi)
18 17.24 – 158.62 bar (250 – 2300 psi) 200 bar (2900 psi)
33 17.24 – 248.28 bar (250 – 3600 psi) 303.45 bar (4400 psi)
HYDRAFORCE
.com
®
PERFORMANCE (Cartridge Only)
Blue rectangles are links to other catalog pages.