FLOW CONTROLS
EC12-34 Pressure Compensator, Load Holding
USASI/ISO:
PERFORMANCE (Cartridge Only)
SYMBOL
5.434.1
Flow Maintenance
with 200 psi Spring, Meter-Out mode
32 cST/150 sus oil at 40°C
18.9/5
37.9/10
56.8/15
94.6/25
75.7/20
FLOW lpm/gpm
34.5
500
PRESSURE DROP bar/psi
240
3500
172
2500
103
1500
DESCRIPTION
A screw-in, cartridge-style, load sense, fl ow-on-demand pressure-compensator with
built-in damping and load-holding features for use in gravity-lowering circuits.
OPERATION
The EC12-34 is designed to be used in combination with a fl ow control valve for
lowering and holding a load. With inlet fl ow at port
➁, port ➂ will deliver required fl ow
regardless of load pressure at
➁. Port ➀ of the compensator must be connected to
the outlet of a fl ow control valve that is connnected to the tank.
FEATURES
• Hardened parts for long life.
• Hardened seat for low-leakage load-holding capability.
• Quiet, modulated response.
• Industry common cavity.
RATINGS
Operating Pressure: Inlet: 241 bar (3500 psi)
Maximum Regulated Flow: 83 lpm (22 gpm) with 200 psi compensating spring
Flow Maintenance: See performance chart
Leakage:
➁ to ➀ at 241 bar (3500 psi): 5 drops per minute when external
metering orifi ce is closed; 160 ml (10 cu. in.) per minute when external
metering orifi ce is open.
Temperature: -40 to 120°C with Buna N seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC12-3; See page 9.112.1
Cavity Tool: CT12-3XX; See page 8.600.1
Seal Kit: SK12-3X-MM; See page 8.650.1
U.S. Patent
7,261,030
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.