DIRECTIONAL VALVES
MP08-20 Manual, Spring Return, Pull-to-Open
DESCRIPTION
A manual, 2-way, pull-to-open, screw-in hydraulic directional valve.
OPERATION
The MP08-20 blocks fl ow from ➁ to ➀ until an operator pulls the shaft outward.
Note: Pressure at port
➀ will directly act on the spool and spring. Port ➀ is
intended to be a tank port only.
The bias spring allows for up to 12.4 bar (180 psi) back-pressure at
➀ before the valve
will open.
FEATURES
• Hardened seat for long life and low leakage.
• Remains closed to 12.4 bar (180 psi) back-pressure.
• Industry common cavity.
RATINGS
Operating Pressure:
Port
➁: 207 bar (3000 psi)
Port
➀: 12.4 bar (180 psi) max.
Proof Pressure: 350 bar (5075 psi)
Flow: See Performance Chart
Internal Leakage
➁ to ➀: 0.25 cc/minute (5 drops/minute) max. at 207 bar (3000 psi)
Mechanical Pull Effort Required at Rated Pressure: 4.5 kg. (10.0 lbs.) initial;
6.8 kg. (15.0 lbs.) full shift
Temperature: -40 to 120°C
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-2; See page 9.108.1
Cavity Tool: CT08-2XX; See page 8.600.1
Seal Kit: SK08-2X-T; See page 8.650.1
USASI/ISO:
SYMBOLS
4.610.1
PERFORMANCE (Cartridge Only)
6.9/100
5.2/75
3.4/50
1.7/25
22.7
6
37.9
10
53.0
14
FLOW lpm/gpm
PRESSURE DROP bar/psi
➁ to ➀
32 cSt/150 ssu oil at 40°C
45.4
12
30.2
8
15.1
4
7.5
2
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.