DIRECTIONAL VALVES
HEP16-S35 HyPerformance
TM
Piloted Spool-Type
PERFORMANCE (Cartridge Only)
SYMBOL
4.502.3
DESCRIPTION
A high-pressure spool-type, screw-in, cartridge-style, hydraulic directional element,
with multi-function potential when used with other directional, pressure, or fl ow control
devices.
OPERATION
The HEP16-S35 is a spring-biased blocking valve which will shift to allow full fl ow from
➀ to ➁ only when pressure at ➀ exceeds the cumulative pressure of ➂, plus the bias
spring pressure value.
HEP16-S35 is a pilot-to-close directional valve.
With no pressure at
➂, fl ow will be allowed from ➀ to ➁ once the bias spring force
is overcome with pressure at
➀.
FEATURES
• Multiple function/application potential.
• Low pressure drop.
x All HyPerformance products are tested to the rigorous standards
of the NFPA specifi cation T2.6.1.
All HyPerformance valves are tested at a verifi cation level of 90%
and an assurance of 99%.
RATINGS
Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
Note: All HyPerformance products are tested for 900K cycles at 350 bar
and 100K at 420 bar.
Proof Pressure: 690 bar (10000 psi)
Burst Pressure: 1380 bar (20000 psi)
Flow: 190 lpm (50 gpm)
Internal Leakage: 164 ml/minute (10 cu. in./minute) max. at 350 bar (5075 psi)
Operating Temperature: -54 to 107°C (-65 to 225°F) with Urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC16-S3; See page 9.116.1
Cavity Tool: HCT16-S3XX; See page 8.600.1
Seal Kit: SK16-S3X-X; See page 8.650.1
HYDRAFORCE
.com
®
6.9/100
5.5/80
76
20
38
10
114
30
189
50
151
40
FLOW lpm/gpm
PRESSURE DROP bar/psi
➀ to ➁ Fully Open
32 cSt/150 sus oil at 40°C
2.8/40
4.1/60
1.4/20
Blue rectangles are links to other catalog pages.
Cartridge: Weight: 0.30 kg. (0.67 lbs.)
Steel with hardened work surfaces.
Zinc-nickel plated exposed surfaces.
PPDI Urethane seals with no backup
rings standard.
Ported Body: Weight: 5.34 kg.
(11.77 lbs.); HyPerformance™
Ductile iron (code ‘D’) standard.
Rated to 345 bar (5000 psi).
Porting
Cartridge Only 0
SAE 16 16TD
1 in. BSP* 8BD
*BSP Body; U.K. Mfr. Only
Bias Spring Value
10 0.7 bar (10 psi)
20 1.4 bar (20 psi)
40 2.8 bar (40 psi)
70 4.8 bar (70 psi)
HEP16-S35
DIMENSIONS
MATERIALS
TO ORDER
HEP16-S35
-__ __ __ - __ - __ __
4.502.4
®
HYDRAFORCE
HYDRAFORCE
.com
®
Logic Element
Seals
U PPDI Urethane
— Recommended for
pressures above 241 bar (3500 psi)
ORIFICE DISCS CANNOT BE
USED WITH THIS PRODUCT.
0.50
12.6
2.23
56.7
0.34
8.6
1.51
38.3
3.62
91.9
0.19
4.8
4.00
01.6
3.25
82.5
0.69
17.5
1.56
39.6
ACROSS FLATS
TORQUE:
195 to 205 ft-lbs
265 to 278 Nm
3.25
82.5
4.00
01.6
2.00
50.8
Blue rectangles are links to other catalog pages.
