DIRECTIONAL VALVES
DESCRIPTION
A screw-in, cartridge-style, bypass-type, pressure-compensating element, with inte-
gral fl ow regulator for load sense signal drain. The internal pressure-compensated
fl ow regulator restricts the load signal bleed fl ow in order to minimize system losses
even at high operating pressures. The main compensator element holds the valves
primary fl ow constant regardless of load pressure changes.
OPERATION
The EPFR52-S35 is a spring-biased spool-type valve with an internal pressure-com-
pensated fl ow regulator between
➁ and ➂. When used as a pump unloading com-
pensator, this valve will bypass fl ow to tank at port
➁ when system pressure reaches
the load pressure plus the bias spring value. When the system load is neutralized, the
load signal is bled through the fl ow regulator bringing the valve to stand-by condition.
FEATURES
• Multiple function in a single cavity.
• Low bleed fl ow throughout the operating pressure range.
• High system effi ciency.
• Industry common cavity
RATINGS
Operating Pressure: Cartridge only: 350 bar (5000 psi);
Aluminum housing: 207 bar (3000 psi); Ductile iron housing: 350 bar (5000 psi).
Flow: 151 lpm (40 gpm); See Performance Chart
Maximum Flow Loss between
➂ and ➁: 0.95 lpm (0.25 gpm) at 345 bar (5000 psi)
Bias Spring Pressure Options:
5.5 bar (80 psi);
7.6 bar (110 psi)
11.0 bar (160 psi) Tall Cap Required
16.5 bar (240 psi) Tall Cap Required
Temperature: -40 to 120°C with standard Buna seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC12-S3; See page 9.112.1
Cavity Tool: CT12-S3xx; See page 8.600.1
Seal Kit: SK12-S3x-MM; See page 8.650.1
PERFORMANCE (Cartridge Only)
SYMBOL
4.464.1
HYDRAFORCE
.com
®
2
3
1
10.3/150
13.8/200
17.2/250
20.7/300
24.1/350
27.6/400
31.0/450
6.9/100
3.4/50
18.9
5
37.9
10
56.8
15
75.7
20
94.6
25
113.6
30
132.5
35
151.4
40
PRESSURE DROP bar/psi
FLOW lpm/gpm
Inlet Pressure vs. Bypass Flow at No-Load Flow Demand
32 cSt/150 sus oil at 40nC
160 psi Spring
110 psi Spring
80 psi Spring
240 psi S
pr
ing
56.8/15
75.7/20
94.6/25
113.6/30
132.5/35
151.4/40
37.9/10
18.9/5
69
1000
138
2000
207
3000
276
4000
345
5000
FLOW lpm/gpm
PRESSURE bar/psi
Flow vs. Load Pressure
32 cSt/150 sus oil at 40nC
EPFR52-S35 Pressure Compensator with Internal
Blue rectangles are links to other catalog pages.