DIRECTIONAL VALVES
HPE16-S67D HyPerformance™ Proportional
DESCRIPTION
A high pressure, screw-in, cartridge-style, proportional, spring-centered, pilot-
operated spool-type hydraulic directional valve.
OPERATION
When the HPE16-S67D is in neutral position, inlet port 3 is blocked and ports 2, 4 and
5 are connected to each other. On remote pilot signal at 1, the spool shifts proportion-
ally to the applied pilot pressure to allow flow from 3 to 4, through a load such as a
hydraulic cylinder or motor, and from 2 to 5 and to tank. Port 5 is to be used as a tank
port only with maximum pressure of 69 bar (1000 psi). On remote pilot signal at 6, the
spool shifts proportionally to the applied force in the opposite direction, thus reversing
the flow direction.
The spool is symmetrical and provides meter-in and meter-out control.
FEATURES
• Hardened spool and cage for long life.
• Cost-effecitve cavity.
• Excellent metering characteristics.
• Good linearity.
• All HyPerformance™ products are tested to the rigorous standards
of the NFPA specification T2.6.1.
• All HyPerformance™ valves are tested at a verification level of 90%
and an assurance of 99%.
RATINGS
Maximum Operating Pressure: Ports 2, 3, 4 (work): 350 bar (5075 psi)
(10% life cycle) 420 bar (6090 psi); Ports 1 and 6 (pilot): 35 bar (500 psi);
Port 5 (tank): 69 bar (1000 psi)
Flow Rating: 95 lpm (25 gpm)
Internal Leakage: 500 ml/minute (30 cu. in./minute) at 350 bar (5075 psi)
Temperature: -54°C to 107°C (-65°F to 225°F) with urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC16-S6. See page 9.142.1
Cavity Tool: HCT16-S6; See page 8.600.1
Seal Kit: HSK16-S6U-0000; See page 8.650.1
ISO SYMBOL
4.424.3
PERFORMANCE (Cartridge Only)
24.1/350
20.7/300
13.8/200
6.9/100
17.2/250
38
10
57
15
19
5
76
20
25
95
FLOW lpm/gpm
PRESSURE DROP bar/psi
Pressure Drop vs. Flow
Piloted; Cartridge Only
2 to 5 or 4 to 5
—
; 3 to 2 or 3 to 4 - - -
3.4/50
10.3/150
32 cSt/150 sus oil at 40°C (104°F)
24.1/350
20.7/300
13.8/200
6.9/100
17.2/250
38
10
57
15
19
5
76
20
25
95
FLOW lpm/gpm
PRESSURE DROP bar/psi
Pressure Drop vs. Flow
Neutral; Cartridge Only
2 to 5 - - -; 4 to 5
—
3.4/50
10.3/150
32 cSt/150 sus oil at 40°C (104°F)
U.S. Patent
6,554,014
HYDRAFORCE
.com
®
Flow vs. Pilot Pressure
3 to 4, Pilot at 1 - - - -
3 to 2, Pilot at 6
—
32 cSt/150 sus oil at 40°C (104°F)
18.9/5
37.9/10
56.8/15
75.7/20
94.6/25
FLOW lpm/gpm
0
0
6.9
100
6.9
100
13.8
200
13.8
200
20.7
300
20.7
300
PILOT PRESSURE bar/psi
Blue rectangles are links to other catalog pages.
Cartridge: Weight: 1.1 kg. (2.4 lbs.) Steel
with hardened work surfaces. Zinc-
plated exposed surfaces.
Urethane seals without back-up rings
standard.
Ported Body: Weight: 9.13 kg. (20.14 lbs.)
HyPerformance™ ductile iron (code 'D')
standard. Rated to 345 bar (5000 psi).
See page 8.016.1
DIMENSIONS
MATERIALS TO ORDER
HPE16-S67D
4.424.4
HPE16-S67D - __ - __
Seals
U PPDI Urethane (Std.)
NOTE: Consult factory for additional seal options.
INCH
MILLIMETRE
2.27
57.6
3.25
82.6
1.75
44.5
4.00
101.6
7.00
177.8
0.50
12.7
0.57
14.5
2.88
73.0
5.13
130.2
0.38
9.5
Mounting (2)
0.34
8.7
6.63
168.3
3.00
76.2
1.63
41.3
2.00
50.8
4.00
101.6
6.00
152.4
1.55
39.2
ACROSS FLATS
ORIFICE DISC
SHOULD NOT BE USED
WITH THIS PRODUCT.
TORQUE
220 to 230 ft-lbs
(298 to 312 Nm)
U.S. Patent 6,554,014
Porting
Cartridge Only 0
SAE 16 16TD
*1 in. BSP 8BD
*BSP Body; U.K. Mfr. Only
®
HYDRAFORCE
HYDRAFORCE
.com
®
Pilot Operated
