DIRECTIONAL VALVES
HPE42-M44 HyPerformance
TM
Piloted 2-Way Spool
DESCRIPTION
A high pressure, screw-in, cartridge-style, pilot-operated, proportional spool-type,
hydraulic directional valve.
OPERATION
In neutral (unpiloted), the HPE42-M44 blocks flow from 2 to 3 bidirectionally. On
remote pilot signal at 1, the spool shifts proportionally to the applied pilot pressure to
allow flow from port 2 to 3 bidirectionally. The spring chamber is vented to port 4.
Pressure at 4 will directly (1:1) affect the pilot pressure required and must be added to
the bias spring valve.
FEATURES
• Hardened spool and cage for long life.
• Optional sealed pilot.
• Cost-effective cavity.
• All HyPerformance™ products are tested to the rigorous standards
of the NFPA specification T2.6.1.
• All HyPerformance™ valves are tested at a verification level of 90%
and an assurance of 99%.
RATINGS
Operating Pressure: 350 bar (5075 psi); 10% duty cycle 420 bar (6090 psi)
Note: All HyPerformance™ products are tested for 900K cycles at 350 bar and
100K cycles at 420 bar.
Proof Pressure: 690 bar (10,000 psi)
Burst Pressure: 1380 bar (20,000 psi)
Flow Rating: 170 lpm (45 gpm)
Internal Leakage: 230 ml/minute (14 cu. in./minute) max. at 350 bar (5075 psi)
Pilot Pressure Required To Full Spool Shift: 27 bar (400 psi) minimum
Operating Fluid Temperature: -54 to 107°C (-65 to 225°F) with PPDI urethane
seals; Storage Temperature: -40 to 70°C (-40 to 160°F)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC42-M4; See page 9.142.1
Cavity Tool: HCT42-M4xx; See page 8.600.1
Seal Kit: SK42-M4U-000; See page 8.650.1
ISO SYMBOL
4.410.1
PERFORMANCE (Cartridge Only)
10.3/150
6.9/100
3.4/50
8.6/125
57
15
95
25
19
5
132
35
170
45
FLOW lpm/gpm
PRESSURE DROP bar/psi
1.7/25
5.2/75
12.1/175
Pressure Drop vs. Flow
2 to 3 or 3 to 2; Fully Open
32 cSt/150 sus oil at 40°C (104°F)
3
2
1
4
HYDRAFORCE
.com
®
133/35
114/30
76/20
38/10
94/25
9.7
140
11.0
160
8.3
120
12.4
180
13.8
200
16.5
240
6.9
100
15.2
220
17.9
260
PILOT PRESSURE bar/psi
FLOW lpm/gpm
Flow vs. Pilot Pressure
2 to 3 or 3 to 2; Pilot Port 1
32 cSt/150 sus oil at 40°C (104°F)
19/5
57/15
151/40
170/45
Blue rectangles are links to other catalog pages.
Cartridge: Weight: 2.0 kg. (4.5 lbs.)
Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
PPDI urethane O-rings without
backup rings standard.
Standard Ported Body: Weight: 10.68
kg (23.56 lbs) HyPerformance™
ductile iron (code 'D') standard.
Rated to 354 bar (5000 psi).
See page 8.042.1
DIMENSIONS
MATERIALS TO ORDER
Option
None
(Blank)
HPE42-M44
4.410.2
HPE42-M44__- __ __ __ - __
Seals
*U PPDI Urethane
*Urethane seals recommended for
operating pressures above 241 bar
(3500 psi).
2
4
INCH
MILLIMETRE
M42 x 2.0 -6g
THREAD
3
6.00
152.4
5.37
136.5
2.64
67.0
0.29
7.2
3.93
99.8
0.34
8.6
1.34
34.0
3.94
100.1
ORIFICE DISC CANNOT BE USED
WITH THIS VALVE
due to HyPerformance™ cavity.
1
4.00
101.6
2.00
50.8
2.25
57.1
4.50
114.3
1.99
ACROSS FLATS
TORQUE
290 – 310 ft-lbs
(393.1 – 420 Nm)
50.4
3.56
90.4
4.87
3
123.7
2
1
4
Porting
Cartridge Only 0
SAE 20 20TD
1-1/4" BSP* 10BD
* BSP body; U.K. mfr. Only
*Ductile iron body for pressures
over 207 bar/3000 psi
®
HYDRAFORCE
HYDRAFORCE
.com
®
NOTE: Consult factory for
additional seal options.
Blue rectangles are links to other catalog pages.
