DIRECTIONAL VALVES
PD10-S62 Piloted Directional Valve
DESCRIPTION
A screw-in, cartridge-style, pilot-operated, spool-type, hydraulic cartridge valve.
OPERATION
In the neutral position, the PD10-S62 allows fl ow between ports ➁ and ➂ and be-
tween ports
➃ and ➄ bidirectionally. When the remote pilot signal at ➀ exceeds the
force of the bias spring, the spool shifts to block fl ow at all ports.
The spring chamber is vented to the tank through port
➅. The vented spring chamber
allows the valve to be fully pressurized at ports
➀, ➁, ➂, ➃ and ➄ without affecting
required pilot pressure. Pressure at
➅ will affect required pilot pressure.
FEATURES
• Hardened spool and cage for long life.
• Optional sealed spool between ports
➀ and ➁.
RATINGS
Maximum Operating Pressure: 250 bar (3625 psi) with standard Buna N seals.
Maximum Total Input Flow: 53 lpm (14 gpm) in any combination of fl ows between
ports
➁ and ➂, and ports ➃ and ➄ (e.g., 2 &12 gpm, 7 & 7 gpm, or 10 & 4 gpm).
Internal Leakage: Maximum leakage at 250 bar (3625 psi):
131 ml/minute (8 cu. in./ minute).
Temperature: -40 to 120°C (-40 to 248°F)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-S6; See page 9.110.1
Cavity Tool: CT10-S6X; See page 8.600.1
Seal Kit: SK10-S6X-BMMMM; See page 8.650.1
USASI:
ISO:
SYMBOLS
4.394.1
PERFORMANCE (Cartridge Only)
6.9/100
3.4/50
7.6
2
22.7
6
FLOW lpm/gpm
PRESSURE DROP bar/psi
32 cSt/150 sus oil at 40°C
30.3
8
38.9
10
45.4
12
53.0
14
10.3/150
13.8/200
17.2/250
15.1
4
➁ to ➂
➃
to ➄
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.