DIRECTIONAL VALVES

HLS06-30 HyPerformance™ Load Shuttle,

DESCRIPTION

A high pressure load-shuttling, screw-in, cartridge-style hydraulic check valve, for

use in blocking circuits where a priority of flow/direction is given to a higher pressure

circuit over a lower one.

OPERATION

The HLS06-30 will allow flow from the higher pressure port 1 or 3 to port 2.

The valve is commonly used to direct oil from the pressure side of a bidirectional

hydraulic motor to a pressure-released hydraulic brake.

FEATURES

• Rapid response to load direction changes.

• Compact size.

• Lower pressure drop.

• Reduced space claim and smaller hydraulic "footprint".

• All HyPerformance™ products are tested to the rigorous standards of NFPA

specification T2.6.1 to a verification level of 90% and an assurance of 99%.

RATINGS

Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)

Proof Pressure: 690 bar (10000 psi)

Burst Pressure: 1380 bar (20000 psi)

Flow: 7.6 lpm (2 gpm)

Internal Leakage: 0.10 cc/minute (2 drops/minute) max. at 350 bar (5075 psi)

Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;

-26 to 204°C (-15 to 400°F) with Viton seals; -54 to 107°C (-65 to 225°F) with PPDI

Urethane seals

Filtration: See page 9.010.1

Fluids: Mineral-based or synthetics with lubricating properties at viscosities of

7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1

Installation: No restrictions; See page 9.020.1

Cavity: HVC06-3; See page 9.106.1

Cavity Tool: HCT06-3XX; See page 8.600.1

Seal Kit: HSK06-3X-MM; See page 8.650.1

ISO SYMBOL

PERFORMANCE (Cartridge Only)

4.266.1

6.9/100

4.1/60

5.5/80

2.8/40

1.4/20

1.9

0.5

5.7

1.5

3.8

1.0

7.6

2.0

FLOW lpm/gpm

PRESSURE DROP bar/psi

Pressure Drop vs. Flow

(Cartridge Only)

Port 1 to 2 Port 3 to 2

32 cSt/150 sus oil at 40°C

HYDRAFORCE

.com

Blue rectangles are links to other catalog pages.

Cartridge: Weight: 0.04 kg. (0.08 lbs.)

Steel with zinc-plated exposed

surfaces.

DIMENSIONS

MATERIALS

TO ORDER

Porting

Cartridge Only 0

Seals

N Buna N

V Fluorocarbon

U PPDI Urethane*

HLS06-30

4.266.2

HLS06-30- __ __ __ - __

9/16-18

UNF-2A

THREAD

INCH

MILLIMETRE

ACROSS FLATS TORQUE –

18 to 21 ft-lbs

(25.7 to 28.5 Nm) Max.

1.54

39.0

0.69

17.4

0.26

6.6

HYDRAFORCE

.com

Ball-Type

*PPDI Urethane seals recom-

mended for operating pressures

above 241 bar/3500 psi.

Consult factory for other available

options.