DIRECTIONAL VALVES
DCV12 Lock Valve
DESCRIPTION
An in-line-housed, double-pilot-operated, hydraulic check valve for use in blocking or
load holding circuits.
OPERATION
The DCV12 allows flow from V ports to C ports, while normally blocking flow in the
opposite direction. Flow will be allowed from C to V when pressure is applied to the
opposite side V port.
The valve has a 4:1 pilot ratio, so at least one-fourth of the load pressure held at
either C port is required at the opposite V port to open the flow passage.
The check is spring-biased at 1.7 bar (25 psi) to assure holding in static or no-load
conditions. An optional sealed piston with check spring bias of 4.1 bar (60 psi) is
available.
FEATURES
• Hardened seat for long life and low leakage.
• Check section serviceable as a cartridge.
• Optional cartridge thermal relief(s).
• Optional sealed piston.
• Optional spring ranges.
• Low pressure drop.
RATINGS
Maximum Operating Pressure: 241 bar (3500 psi)
Flow: See Performance Chart
Internal Leakage Cx to Vx: 0.25 cc/minute (5 drops/minute) max.
at 207 bar (3000 psi);
Vx to Vx (without sealed piston): 328 cc/minute (20 cu. in./minute) max.
at 240 bar (3500 psi)
Pilot Ratio: 4:1
Check Spring Bias: 1.7 bar (25 psi); with sealed piston option, 4.1 bar (60 psi)
Optional Thermal Relief Factory Setting: 348 ± 38 bar (5050 ± 550 psi)
Thermal Relief Reseat: 207 bar (3000 psi) minimum.
Operating Temperature: -40°C to 120°C (-40°F to 248°F) with standard Buna seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Seal Kit (for CV12-2x): SK12-2x-T (2 required); See page 8.650.1
Pilot Piston Service Part Numbers:
O-Ring (1) – Buna 6001115, Fluorocarbon 6003115
Back-up (2) – Fluorocarbon 6011115 (all)
USASI:
SYMBOLS
4.252.1
ISO:
PERFORMANCE (Cartridge Only)
1.7/25
3.4/50
5.2/75
6.9/100
18.9
5
37.9
10
56.8
15
FLOW lpm/gpm
PRESSURE DROP bar/psi
1 to 2
with 1.7 bar/25 psi spring
32 cSt/150 sus oil at 40°C
75.8
20
94.6
25
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.