DIRECTIONAL VALVES
PC10-30 Check, Pilot-to-Open
DESCRIPTION
A screw-in, cartridge-style, pilot-operated, hydraulic check valve for use in blocking
or load-holding circuits.
OPERATION
The PC10-30 allows flow passage from 2 to 3, while normally blocking flow from
3 to 2. Flow will be allowed from 3 to 2 when pressure is applied at 1.
The cartridge has a 4:1 pilot ratio, meaning that at least one-fourth of the load
pressure held at 3 is required at 1 to open the valve.
The check is spring-biased to assure holding in static or no-load conditions.
A sealed pilot piston option is available.
Note: Special higher bias spring values available. Consult factory.
FEATURES
• Hardened seat for long life and low leakage.
• Optional sealed piston.
• Optional spring ranges.
• Industry common cavity.
RATINGS
Operating Pressure: 241 bar (3500 psi)
Flow: See Performance Chart
Maximum Internal Leakage at 207 bar (3000 psi):
3 to 2: 0.10 ml/minute (2 drops/minute)
2 to 1 without sealed piston: 115 ml/minute (7 cu. in./minute)
2 to 1 with sealed piston: zero leakage
Pilot Ratio: 4:1
Check Bias Spring: 2.07 bar (30 psi);
With sealed piston option: 6.2 bar (90 psi) minimum
Temperature: -40 to 120°C (-40 to 248°F) with standard Buna seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-3; See page 9.110.1
Cavity Tool: CT10-3XX; See page 8.600.1
Seal Kit: SK10-3X-TM (Buna N); SK10-3V-TM (Viton); SK10-3P-TM (Polyurethane)
See page 8.650.1
PERFORMANCE (Cartridge Only)
ISO SYMBOL
4.101.1
Pressure Drop vs. Flow
For cartridge only with 70 psi spring
3 to 2 —— (p); 2 to 3 - - - (r)
32 cSt/150 sus oil at 40°C
6.9/100
10.4/150
13.8/200
3.4/50
7.6
2
15.1
4
22.7
6
FLOW lpm/gpm
PRESSURE DROP bar/psi
30.2
8
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.