TS58-21F Proportional Pressure Relieving Valve
DESCRIPTION
A screw-in, cartridge-style, single-stage, poppet-type pressure relieving valve, which
can be infinitely adjusted across a prescribed range using a variable electric input.
Pressure output is inversely proportional to DC current input.
OPERATION
The TS58-21F blocks flow from 1 to 2 until sufficient pressure is present at 1 to open
the valve by overcoming the preset spring force. With no current applied, the valve
will relieve at ±50 psi of the spring maximum. Applying current to the coil
reduces the induced spring force thereby reducing the valve setting.
FEATURES
• 12 and 24 volt coils standard.
• Optional waterproof E-Coils rated up to IP69K.
• Industry common cavity.
• Hardened parts for long life.
RATINGS
Maximum Operating Pressure: 393 bar (5700 psi)
Relief Pressure Range from Zero to Maximum Control Current:
344.7–6.9 bar (5000–100 psi)
Hysteresis at 200 Hz PWM: 5%
Rated Flow: 1.9 lpm/0.5 gpm; P = 6.9 to 9 bar (100 to 130 psi), cartridge only,
1 to 2 coil energized
Flow Path: Free Flow: 1 to 2 coil energized; Relieving: 1 to 2 coil de-energized
Electrical Parameters:
Coil Typical Max. Current
(A) at 0 gpm
Typical Resistance ± 5%
@ 20°C (ohms)
Typical Apparent
Inductance (mH)
12 VDC 24 VDC 12 VDC 24 VDC 12 VDC 24 VDC
D-Coil 1.25 0.63 7.2 ±3% 28.8 ±5% 156 546
E-Coi
l
1.30 0.65 7.1 ±3% 28.5 ±5% 160 560
Temperature: -40° to 121°C (-40° to 250° F) with standard Buna N seals
-35° to 204°C (-31° to 400°F) with Fluorocarbon seals;
-54° to 107°C (-65° to 225°F) with Polyurethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation Recommendation: When possible, the valve should be mounted below
the reservoir oil level. This will maintain oil in the armature preventing trapped air
instability. If this is not feasible, mount the valve horizontally for best results.
Cavity: VC08-2; See page 9.108.1; Cavity Tool: CT08-2XX; See page 8.600.1
Seal Kit: SK08-2X-B; See page 8.650.1
Coil Nut: Part No. 4540550
ISO SYMBOL
2.825.1
PERFORMANCE
ELECTRO-PROPORTIONAL VALVES—PRESSU
U.S. Patent
6,267,350
HYDRAFORCE
.com
®
PRESSURE DROP VS. FLOW CHARACTERISTIC
Flow from Port 1 to Port 2 with Coil Energized
32
28
24
20
16
12
8
4
0
PRESSURE (BAR)
PRESSURE (PSI)
FLOW (GPM)
FLOW (LPM)
0
0
100
200
300
400
500
0.1 0.2 0.3 0.4 0.5
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
TYPICAL RELIEVING PRESSURE
Port 1 to Port 2; No Current Applied; Upper & Lower Limit
FLOW (LPM)
FLOW (GPM)
0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
0.1 0.2 0.3 0.4 0.5
241
276
310
345
379
PRESSURE (BAR)
3500
4000
4500
5000
5500
PRESSURE (PSI)
Performance info. continued on following page.
RE CONTROLS
Blue rectangles are links to other catalog pages.