PV70-33 Proportional Flow Control Cartridge,
USASI/ISO:
SYMBOLS
2.400.1
PERFORMANCE
20.7/300
7.5
2
FLOW lpm/gpm
PRESSURE DROP bar/psi
➂ to ➁ Coil Energized
Through Cartridge & Ported Body
32 cSt/150 ssu oil at 40°C
Note: Port ➀ is not used.
15.1
4
22.7
6
30.2
8
37.9
10
45.4
12
53.0
14
17.2/250
13.8/200
10.3/150
6.9/100
3.4/50
ABC
1
2
3
1
2
3
DESCRIPTION
A linear solenoid-driven, two-way normally closed, screw-in cartridge valve designed
for use with a pressure compensator to function as an electrically stroked variable
fl ow regulator.
OPERATION
With increasing electric current, the PV70-33 changes from full closed to full open
with fl ow from port
➂ to port ➁. Port ➀ is used only to pressure balance the spool
and should be plugged. The proportional valve is intended to function in tandem with
standard HydraForce pressure compensators at pressure differentials of 21 bar
(300 psid) or less, or alone in variable volume pressure-compensated circuits with
load sense capability.
The valve is designed to work with industry-common controllers which typically fea-
ture current capability to 2 amps @ 12 VDC, PWM, and start/stop trim adjustments
(I-min./I-max.). Consult factory for details and potential sourcing.
Operation of Manual Override:
To Engage: Turn clockwise approximately 1 turn to reach start point. Continue
another approximately 5 turns to full shift.
To Disengage: Turn counterclockwise approximately 6 turns to positive stop.
FEATURES
• Excellent linearity and hysteresis.
• Optional control orifi ce sizes.
• Hardened spool and cage for long life.
• Optional coil voltages and terminations.
• Effi cient wet armature construction.
RATINGS
Operating Pressure: 207 bar (3000 psi)
Internal Leakage: 197 cc/min. (12 cu. in./min.) fully closed at 207 bar (3000 psi)
Electrical: 2 standard voltage ratings
Threshold
Current (mA)
A & B C
Range Range
300 ± 70 360 ± 70
150 ± 35 180 ± 35
Coil
Voltage
12 VDC
24 VDC
Max. Control
Current (mA)
A & B C
Range Range
1500 ± 200 1400 ± 200
750 ± 100 700 ± 100
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1.
Cavity: VC10-3; See page 9.110.1; Cavity Tool: CT10-3X-XX; See page 8.600.1
Seal Kit: SK10-3X-MM; See page 8.650.1 for seal kit options
and appropriate seals based on application temperature range.
ELECTRO-PROPORTIONAL VALVES—FLOW CONTROLS
HYDRAFORCE
.com
®
• Cartridges voltage interchangeable.
• Unitized, molded coil design.
• Coil waterproofi ng standard.
• Manual override option.
Recommended Electronic Controllers:
See page 2.001.1 or our Electronics catalog.
Blue rectangles are links to other catalog pages.
DIMENSIONS
PV70-33
2.400.2
Normally Closed
C
I
E
C
R
O
F
A
R
D
Y
H
X
X
X
X
X
X
.
N
1.06
27.0
ACROSS FLATS
2.70
1.81
68.6
46.0
0.87 1.86
22.1 47.2
MILLIMETRE
INCH
1.13
28.6
ACROSS FLATS
18.8
53.8
66.5
34.5
7.1
50.86.4
63.5
31.8
31.8
1.36
2.00
Plugged
0.25
2.62
2.12
0.74
2.50
1.25
1.25
0.28
2
3
1
TORQUE: 10–12 ft-lbs
(14–16 Nm)
TORQUE:
27 ft-lbs max.
(36.7 Nm)
1
2
44.1
1.74
3
.67
17.0
3.37
85.6
1.71
43.4
2.09
53.1
MANUAL
OVERRIDE
OPTION
"G"
MANUAL OVERRIDE
OPTION "M"
®
HYDRAFORCE
HYDRAFORCE
.com
®
Porting
0 Cartridge
Only
6T SAE 6
8T SAE 8
2B 1/4 in. BSP*
3B 3/8 in. BSP*
Option(s)
None
(Blank)
Manual
Override M
Manual
Override
with Guard G
Cartridge: Weight: 0.19 kg. (0.42 lbs.)
Steel with hardened work surfaces.
Zinc-plated exposed surfaces. Buna
N O-rings and polyester elastomer
back-ups standard.
Standard Ported Body: Weight:
0.36 kg. (0.80 lbs.) Anodized high-
strength 6061 T6 aluminum alloy,
rated to 207 bar (3000 psi). Ductile
iron bodies available; dimensions
may differ. See page 8.010.1
70-Size “D” Coil: Weight: 0.32 kg.
(0.7 lbs.) Unitized thermoplastic
encapsulated, Class H high
temperature magnet-wire.
See page 3.200.7.
70-Size “E” Coil: Weight: 0.41 kg.
(0.9 lbs.) Fully encapsulated with
rugged external metal shell.
IP69K rated. See page 3.400.13.
Port Plug: For SAE 6 Port: 6103006
For SAE 8 Port: 6103008;
See page 8.500.1.
MATERIALS
TO ORDER
PV70-33 __ __ - __ __ __ - __ - __ __ __ __
Flow Range
A
B
Voltage
0 Less Coil
12 12 VDC
24 24 VDC
Required. See
Performance
Curves.
Coils with internal diode are
available. Consult factory.
Seals
Buna N (Std.) N
Fluorocarbon V
*BSP Body;
U.K. Mfr. Only
Terminations D-Coil
DS Dual Spades
DG DIN 43650
DL Leadwires (2)
DL/W Leads w/Weatherpak
®
Connectors
Terminations E-Coil
IP69K Rated
ER Deutsch DT04-2P
EY Metri-Pack
®
150
Blue rectangles are links to other catalog pages.
