DESCRIPTION
A solenoid-operated, two-way, normally closed, electro-proportional, hydraulic
cartridge valve intended for use with an external pressure compensator or
load-sensing-style pump control.
OPERATION
When de-energized, the PV16-23 blocks fl ow from ➀ to ➁. With increasing current
applied to the solenoid, output fl ow from
➀ to ➁ will increase proportionally.
The PV16-23 is intended for use with an operating differential across the valve
of 7 bar to 11 bar (100 psi to 160 psi). The set value of the external pressure
compensator or pump control must provide for both the valve operating differential,
as well as for system losses between the compensator and the PV16-23 at the
maximum required fl ow.
Operation of Manual Override: To Engage: Turn clockwise approximately 1 turn to
reach start point. Continue another approximately 5 turns to full shift. To Disengage:
Turn counterclockwise approximately 6 turns to positive stop.
FEATURES
• Excellent linearity and hysteresis characteristics.
• Hardened spool and cage for long life.
• Optional coil voltages and terminations.
• Effi cient wet armature construction.
RATINGS
Maximum Operating Pressure: 241 bar (3500 psi)
Maximum Flow Rate: 95 to 170 lpm (25 to 45 gpm); see performance graphs.
Maximum Internal Leakage: 0.38 lpm (0.10 gpm) at port
➁ with 13.8 bar (200 psi)
at port
➀ with no current applied.
Electrical: EHPR08 Coil, 2 standard voltage ratings
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1.
Cavity: VC16-2; See page 9.116.1; Cavity Tool: CT16-2XX; See page 8.600.1
Seal Kit: SK16-2X-M; See page 8.650.1 for seal kit options
and appropriate seals based on application temperature range.
USASI/ISO:
SYMBOL
2.348.1
PERFORMANCE (Cartridge Only)
HYDRAFORCE
.com
®
ELECTRO-PROPORTIONAL VALVES—FLOW CONTROLS
PV16-23 Proportional Flow Control Cartridge,
Threshold Current
400 ± 100 mA
200 ± 50 mA
Coil Voltage
12 VDC
24 VDC
Max. Control Current
1400 ± 100 mA
700 ± 50 mA
Resistance at 20°C
5.4 ohms
21.7 ohms
Pressure Drop vs. Flow ~ to
at Maximum Control Current
12V EHPR08 Coil, 110 Hz PWM
138 bar/2000 psi load at
32 cSt/150 sus oil at 40°C
12.4/180
9.7/140
11.0/160
8.3/120
5.5/80
6.9/100
75.7
20
94.6
25
113.6
30
132.5
35
151.4
40
170.3
45
FLOW lpm/gpm
PRESSURE DROP bar/psi
189.3
50
Flow vs. Current at 207 bar/3000 psi
Compensating Inlet at 10.3 bar/150 psi
12V EHPR08 Coil, 110 Hz PWM
32 cSt/150 sus oil at 40°C
189.3/50
113.6/30
151.4/40
75.7/20
37.9/10
0 20 40 60 80 100
Percent of Maximum Control Current
FLOW gpm/lpm
Recommended Electronic Controllers:
See page 2.001.1 or our Electronics catalog.
Blue rectangles are links to other catalog pages.