DESCRIPTION
A solenoid-operated, 5-way, 3-position, proportional, screw-in hydraulic cartridge
valve with integral brake release port.
OPERATION
When de-energized, the SP10-58D allows flow between 4, 3, 2, and 1. When coil #1
is energized, flow is allowed from 5 to 2, and from 4 to 3. When coil #2 is energized,
flow is allowed from 5 to 4, and from 2 to 3. Load sense is connected to port 5 when
the spool is in shifted positions.
Note: If low voltage is expected on the machine, 12 or 24 volt systems will
require the use of 10 volt or 20 volt coils respectively. See “SP Valves and Coil
Operating Parameters,” page 2.002.1.
FEATURES
• Continuous-duty rated solenoid.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations
• Cartridges are voltage interchangeable.
• Optional manual override.
• Optional waterproof E-Coils rated up to IP69K.
RATINGS
Operating Pressure: 250 bar (3625 psi) with standard Buna N seals
Flow: 22.8 lpm (6 gpm) max. See performance chart
Internal Leakage: 246 cc/minute (15 cu. in./minute) max. at 207 bar (3000 psi)
Temperature: -40 to 120°C with standard Buna seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-5; See page 9.110.1; Cavity Tool: CT10-5XX; See page 8.600.1
Seal Kit: SK10-5X-MMMM; See page 8.650.1
Coil Nut: Part No. 7004400
Coil Spacer: Std. D-Coil Spacer Part No. 7000280; E-Coil Spacer Part No. 4539700;
If cartridge is ordered "Less Coil," D-Coil spacer will be provided unless an E is
specified in the Coil Termination To Order section.
SYMBOLS
2.146.1
USASI:
ISO:
PERFORMANCE (Cartridge Only)
5
4
3
2
1
ELECTRO-PROPORTIONAL VALVES—DIRECTIONAL CONTROL
15.1/4
18.9/5
7.5/2
3.8/1
11.4/3
22.7/6
0
0.81.0 0.6 0.8 1.21.2 0.4 0.2 0.40.2 0.6 1.00
AMPERAGE with 100 Hz Dither
FLOW lpm/gpm
Bottom Coil
Performance with 12 VDC Coils
and 10.3 bar/150 psi inline compensator
(for other voltages consult factory)
Top Coil
Performance information continued on following page.
17.2/250
15.5/225
13.8/200
12.1/175
10.3/150
8.6/125
6.9/100
3.4/50
5.2/75
1.7/25
3.8
1
7.6
2
11.4
3
15.1
4
18.9
5
22.7
6
FLOW lpm/gpm
PRESSURE bar/psi
32 cSt/150 sus oil at 40°C
4 to 3 or 2 to 3 at 100% current, S1 or S2 energized:
————
5 to 2 or 5 to 4 at 100% current, S1 or S2 energized: - - - - - - -
SP10-58D Spool, 5-Way, 3-Position . . .
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.
DIMENSIONS
SP10-58D
2.146.2
INCH
MILLIMETRE
1.00
25.4
ACROSS
FLATS
TORQUE:
24–26 ft-lbs
(32.5–35.3 Nm)
max.
TORQUE:
5–7 ft-lbs
(6.8–9.5 Nm)
max.
1.36
34.5
2.62
66.5
5.00
127
1.48
37.6
2.00
50.8
1.99
50.6
4.38
111.3
0.75
19.1
3.06
77.7
5
4
4
3
2
2
1
1
5
3
0.34
8.7
4.00
101.6
0.19
4.8
3.63
92.1
1.62
41.1
1.84
DIA.
46.7
5.74
Manual
Override
"M"
Manual
Override
"B"
145.7
4.43
112.5
E-Coil
View
Standard
Coil View
0.75
19.1
ACROSS
FLATS
69
1000
DIFFERENTIAL PRESSURE bar/psi
FLOW lpm/gpm
138
2000
207
3000
15.1/4
18.9/5
22.7/6
26.5/7
11.4/3
7.6/2
3.8/1
1.1 AMP
0.85 AMP
0.60 AMP
Pressure Compensation
Inlet to Work Port
PERFORMANCE (Continued)
for Brake Release Applications
®
HYDRAFORCE
HYDRAFORCE
.com
®
SP10-58D__ - __ __ __ - __ - __ __ __ __ __
TO ORDER
Seals
Buna N (Std.) N
Fluorocarbon V
E-Coil
10 10 VDC
12 12 VDC
20 20 VDC
24 24 VDC
Voltage
Std. Coil
00 Less Coil**
10 10 VDC
†
12 12 VDC
20 20 VDC
24 24 VDC
**Includes D-Coil
Nut and Spacer.
†
DS, DW or DL
terminations only.
MATERIALS
Cartridge: Weight: 0.36 kg.
(0.80 lbs.) Steel with hardened
work surfaces. Zinc-plated
exposed surfaces; Buna N
O-rings and back-ups
standard.
Standard Ported Body:
Weight: 0.41 kg. (0.85 lbs.);
Anodized high-strength 6061
T6 aluminum alloy, rated to
207 bar (3000 psi); Ductile iron
bodies available; dimensions
may differ. See page 8.010.1.
Standard Coil: Weight each:
0.27 kg. (0.60 lbs.); Unitized
thermoplastic encapsulated,
Class H high temperature
magnetwire. See page 3.200.1
E-Coil: Weight each: 0.41 kg.
(0.9 lbs.); Perfect wound, fully
encapsulated with rugged ex-
ternal metal shell; Rated up to
IP69K with integral connectors.
See page 3.400.1
Porting
Cartridge Only 0
SAE 6 6T
SAE 8 8T
Option
None (
Blank)
Manual Override B
Manual Override M
For Manual Override options
see page 1.001.1
Recommended Electronic Controllers:
See page 2.001.1 or our Electronics catalog.
For Coils with Zener Diode, add “/Z” to option code.
For example: “ER/Z”. Not available on all models.
See coil option info. on pages 3.200.1 & 3.400.1
Coil Termination E-Coil D-Coil
Less Coil "E" Spacer E —
Deutsch DT04-2P ER (IP69K) DR (IP65)
Metri-Pack
®
150 EY (IP69K) DY (IP65)
Dual Lead Wires EL (IP69K) DL (IP65)
Amp Jr. Timer EJ (IP67) —
DIN 43650 EG (IP65) DG (IP65)
Dual Spades — DS (IP65)
