DESCRIPTION

A solenoid-operated, five-way, three-position, proportional, screw-in hydraulic

cartridge valve with integral load-sense port.

OPERATION

When de-energized, the SP10-57D blocks flow at 5 while allowing flow from both 2

and 4 to 3. When coil #1 is energized, flow is allowed from 5 to 2, and from 4 to 3.

When coil #2 is energized, flow is allowed from 5 to 4, and from 2 to 3. Load sense is

connected to port 5 when the spool is in shifted positions.

Note: If low voltage is expected on the machine, 12 or 24 volt systems will

require the use of 10 volt or 20 volt coils respectively. See “SP Valves and Coil

Operating Parameters,” page 2.002.1.

FEATURES

• Continuous-duty rated solenoid.

• Hardened precision spool and cage for long life.

• Optional coil voltages and terminations

• Cartridges are voltage interchangeable.

• Optional manual override.

• Optional waterproof E-Coils rated up to IP69K.

RATINGS

Operating Pressure: 250 bar (3625 psi) with standard Buna N seals

Flow: 22.8 lpm (6 gpm) max. See performance chart

Internal Leakage: 246 cc/minute (15 cu. in./minute) max. at 207 bar (3000 psi)

Temperature: -40 to 120°C with standard Buna seals

Coil Duty Rating: Continuous from 85% to 115% of nominal voltage

Filtration: See page 9.010.1

Fluids: Mineral-based or synthetics with lubricating properties at viscosities of

7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1

Installation: No restrictions; See page 9.020.1

Cavity: VC10-5; See page 9.110.1; Cavity Tool: CT10-5XX; See page 8.600.1

Seal Kit: SK10-5X-MMMM; See page 8.650.1

Coil Nut: Part No. 7004400

Coil Spacer: Std. D-Coil Spacer Part No. 7000280; E-Coil Spacer Part No. 4539700;

If cartridge is ordered "Less Coil," D-Coil spacer will be provided unless an E is

specified in the Coil Termination To Order section.

SYMBOLS

2.136.1

USASI:

ISO:

PERFORMANCE (Cartridge Only)

ELECTRO-PROPORTIONAL VALVES—DIRECTIONAL CONTROL

Performance information continued on following page.

15.1/4

22.7/6

7.5/2

3.8/1

11.4/3

18.9/5

1.0 1.00.5 0.50

AMPERAGE with 100 Hz Dither

FLOW lpm/gpm

Top Coil Bottom Coil

Performance with 12 VDC Coils

and 10.3 bar/150 psi inline compensator

(for other voltages consult factory)

17.2/250

15.5/225

13.8/200

12.1/175

10.3/150

8.6/125

6.9/100

3.4/50

5.2/75

1.7/25

3.8

7.6

11.4

15.1

18.9

22.7

FLOW lpm/gpm

PRESSURE bar/psi

32 cSt/150 sus oil at 40°C

4 to 3 or 2 to 3 at 100% current, S1 or S2 energized:

————

5 to 2 or 5 to 4 at 100% current, S1 or S2 energized: - - - - - - -

SP10-57D Spool, 5-Way, 3-Position . . .

HYDRAFORCE

.com

Blue rectangles are links to other catalog pages.

DIMENSIONS

SP10-57D

2.136.2

INCH

MILLIMETRE

1.00

25.4

ACROSS

FLATS

TORQUE:

24–26 ft-lbs

(32.5–35.3 Nm)

max.

TORQUE:

5–7 ft-lbs

(6.8–9.5 Nm)

max.

1.36

34.5

2.62

66.5

5.00

127

1.48

37.6

2.00

50.8

1.99

50.6

4.38

111.3

0.75

19.1

3.06

77.7

0.34

8.7

4.00

101.6

0.19

4.8

3.63

92.1

1.62

41.1

1.84

DIA.

46.7

5.74

Manual

Override

"M"

Manual

Override

"B"

145.7

4.43

112.5

E-Coil

View

Standard

Coil View

0.75

19.1

ACROSS

FLATS

1000

DIFFERENTIAL PRESSURE bar/psi

FLOW lpm/gpm

138

2000

207

3000

15.1/4

18.9/5

22.7/6

26.5/7

11.4/3

7.6/2

3.8/1

1.1 AMP

0.85 AMP

0.60 AMP

Pressure Compensation

Inlet to Work Port

PERFORMANCE (Continued)

for Load Sense Applications

HYDRAFORCE

.com

SV10-57D__ - __ __ __ - __ - __ __ __ __ __

TO ORDER

Seals

Buna N (Std.) N

Fluorocarbon V

E-Coil

10 10 VDC

12 12 VDC

20 20 VDC

24 24 VDC

Voltage

Std. Coil

00 Less Coil**

10 10 VDC

†

12 12 VDC

20 20 VDC

24 24 VDC

**Includes D-Coil

Nut and Spacer.

†

DS, DW or DL

terminations only.

MATERIALS

Cartridge: Weight: 0.36 kg.

(0.80 lbs.) Steel with hardened

work surfaces. Zinc-plated

exposed surfaces; Buna N

O-rings and back-ups standard.

Standard Ported Body: Weight:

0.41 kg. (0.85 lbs.); Anodized

high-strength 6061 T6 alumi-

num alloy, rated to 207 bar

(3000 psi); Ductile iron bodies

available; dimensions may

differ. See page 8.010.1.

Standard Coil: Weight each:

0.27 kg. (0.60 lbs.); Unitized

thermoplastic encapsulated,

Class H high temperature mag-

netwire. See page 3.200.1

E-Coil: Weight each: 0.41 kg.

(0.9 lbs.); Perfect wound, fully

encapsulated with rugged ex-

ternal metal shell; Rated up to

IP69K with integral connectors.

See page 3.400.1

Porting

Cartridge Only 0

SAE 6 6T

SAE 8 8T

Option

None (

Blank)

Manual Override B

Manual Override M

For Manual Override options

see page 1.001.1

Recommended Electronic Controllers:

See page 2.001.1 or our Electronics catalog.

For Coils with Zener Diode, add “/Z” to option code.

For example: “ER/Z”. Not available on all models.

See coil option info. on pages 3.200.1 & 3.400.1

Coil Termination E-Coil D-Coil

Less Coil "E" Spacer E —

Deutsch DT04-2P ER

(IP69K) DR (IP65)

Metri-Pack

150 EY (IP69K) DY (IP65)

Dual Lead Wires EL (IP69K) DL (IP65)

Amp Jr. Timer EJ (IP67) —

DIN 43650 EG

(IP65) DG (IP65)

Dual Spades — DS (IP65)

Blue rectangles are links to other catalog pages.