SP10-46R Spool, 4-Way, 2-Position
USASI/ISO:
SYMBOLS
2.090.1
22.7/6
15.1/4
18.9/5
26.5/7
7.5/2
11.4/3
3.8/1
0.2 0.4 0.6 0.8 1.0 1.2
CURRENT amps
FLOW lpm/gpm
Flow vs. Current
100 Hz PWM; 12 VDC
32 cSt/150 ssu oil at 40°C
Acceptable Range
ELECTRO-PROPORTIONAL VALVES—DIRECTIONAL CONTROL
DESCRIPTION
A proportional, solenoid-operated, four-way, two-position, screw-in hydraulic
cartridge valve.
OPERATION
When de-energized, the SP10-46R allows fl ow from ➁, ➀ and ➃, while blocking
fl ow at
➂. When energized, metered fl ow is allowed from ➂ to ➃, as well as metered
return fl ow from
➁ to ➀.
FEATURES
• Continuous-duty rated solenoid.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Effi cient wet-armature construction.
• Cartridges are voltage interchangeable.
• Optional waterproof E-Coils rated up to IP69K.
• Good linearity and hysteresis.
• Industry common cavity.
RATINGS
Operating Pressure: 247 bar (3625 psi) with standard Buna N seals
Flow: 22.7 lpm (6 gpm) maximum; see performance chart
Internal Leakage: 328 ml/minute (20 cu. in./minute) max. at 207 bar (3000 psi)
Temperature: -40 to 120°C with standard Buna seals
Coil Duty Rating: Standard Coils and E-Coils: Continuous from 85% to 115% of
nominal voltage
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-4; See page 9.110.1
Cavity Tool: CT10-4XX; See page 8.600.1
Seal Kit: SK10-4X-MMM; See page 8.650.1
Coil Nut: Part No. 7004400;
For E-coils manufactured prior to 1-1-04, see page 3.400.1 for coil nut info.
10.3/150
6.9/100
3.4/50
0
3.8
1
7.5
2
11.4
3
15.1
4
18.9
5
22.7
6
FLOW lpm/gpm
PRESSURE DROP bar/psi
➂ to ➃, S2 energized: ———
➁ to ➀, S1 energized: - - - - - -
32 cSt/150 sus oil at 40°C
18.9/5
15.1/4
11.4/3
7.6/2
3.8/1
0
69
1000
138
2000
207
3000
PRESSURE bar/psi
FLOW lpm/gpm
Pressure Compensation, Inlet to Work Port
Typical Differential Pressure
32 cSt/150 sus oil at 40°C
0.7 amp
Current
0.5 amp
Current
HYDRAFORCE
.com
®
PERFORMANCE (Cartridge Only)
Recommended Electronic Controllers:
See page 2.001.1 or our Electronics catalog.
Blue rectangles are links to other catalog pages.