DESCRIPTION

A solenoid-operated, normally-closed, proportional, poppet-type, screw-in hydraulic

cartridge valve incorporating an integral load-sense pressure port with isolation check.

OPERATION

When de-energized, the SPCL10-30 blocks flow at all ports. When energized,

proportionally-regulated flow is allowed from

3 to 1 with a check-isolated

load-sense signal supplied at 2. Reverse flow is not allowed from 1 to 3.

Note: When using this valve in bridge circuits, seals should not be used on the pilot

pistons of the pilot-operated check valves. This is to avoid trapping oil which would

keep the pilot-operated check valve open.

Note: If low voltage is expected on the machine, 12 or 24 volt systems will

require the use of 10 volt or 20 volt coils respectively. See “SP Valves and

Coil Operating Parameters,” page 2.002.1.

FEATURES

• Industry-common cavity. • Efficient wet-armature construction.

• Continuous-duty rated coils. • Optional waterproof E-Coils rated up to IP69K.

• Reduce manifold space claim.

RATINGS

Operating Pressure: 250 bar (3625 psi); Holding Pressure at 1: 350 bar (5000 psi)

Internal Leakage: Ports 1 and 3: 5 drops/minute max. at 250 bar (3625 psi)

Port 2: 10 drops/minute max. at 250 bar (3625 psi)

Operating Temperature: -40° to 100°C (-40° to 212° F) with standard Buna N seals;

-26° to 204°C (-15° to 400°F) with Fluorocarbon seals;

-54°C to 107°C (-65°F to 225°F) with Polyurethane seals

Coil Duty Rating: Continuous from 85% to 115% of nominal voltage

Initial Coil Current Draw at 20°C: Standard D-Coil: 1.67 amps at 12 VDC;

0.18 amps at 115 VAC (full wave rectified).

E-Coil: 1.7 amps at 12 VDC; 0.85 amps at 24 VDC

Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)

Installation: No restrictions; See page 9.020.1; Filtration: See page 9.010.1

Fluids: Mineral-based or synthetics with lubricating properties at viscosities of

7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1

Cavity: VC10-3, Variation “B”; See page 9.110.1

Cavity Tool: CT10-3xx; See page 8.600.1

Seal Kit: SK10-3X-MM; See page 8.650.1

Coil Nut: Part No. 7004400

SPCL10-30 Poppet, 3-Port, Normally Closed

SYMBOL

2.040.1

PERFORMANCE (Cartridge Only)

HYDRAFORCE

.com

ELECTRO-PROPORTIONAL VALVES—DIRECTIONAL CONTROL

ISO:

Expanded:

7.6/2

15.1/4

22.7/6

30.3/8

68.1/18

60.6/16

53.0/14

45.4/12

37.9/10

75.7/20

0.1 0.2

30 40 50 60 70 80 90 100

0.40.3 0.5 0.8 0.9 1.0 1.1 1.20.6 0.7

Amps:

% of Max. Control Current:

FLOW lpm/gpm

FLOW vs. CURRENT

16 bar/230 psi – – –; 35 bar/500 psi ——

Ranges Shaded

18.9/5

37.9/10

56.8/15

75.7/20

170.3/45

151.4/40

132.5/35

113.6/30

94.6/25

189.2/50

0.1 0.2

30 40 50 60 70 80 90 100

0.40.3 0.5 0.8 0.9 1.0 1.1 1.20.6 0.7

Amps:

% of Max. Control Current:

FLOW lpm/gpm

FLOW vs. CURRENT

103 bar/1500 psi – – –; 206 bar/3000 psi ——

Ranges Shaded

U.S. Patent

7,921,880

Blue rectangles are links to other catalog pages.

DIMENSIONS

SPCL10-30

2.040.2

TO ORDER

Cartridge: Weight: 0.2 kg.

(0.44 lbs.); Steel with hardened

work surfaces. Zinc-plated

exposed surfaces. Buna N

O-rings and polyester elastomer

back-up standard.

Standard D-Coil: Weight: 0.27 kg.

(0.60 lbs.); Unitized thermoplas-

tic encapsulated, Class H high

temperature magnetwire. See

page 3.200.1.

E-Coil: Weight: 0.41 kg. (0.9 lbs.);

Fully encapsulated with rugged

external metal shell. Rated up to

IP69K with integral connectors.

Note: See page 3.400.1 for all

E-Coil retrofit applications.

MATERIALS

HYDRAFORCE

.com

1.00

25.4

1.62

41.1

1.84

DIA.

46.7

E-Coil

View

3.50

TORQUE

24–26 ft-lbs

(32.5–35.3 Nm)

88.9

0.87

22.1

1.48

37.6

2.32

59.0

D-Coil

View

TORQUE

5 – 7 ft-lb.

(6.8 Nm max.)

Manual

Override

Manual

Override M, or Y

 to ~

0.5A - - - - - ; 0.75A – – – –

1.0A — — —; 1.2A ———

32 cSt/150 sus oil at 40°C

241/3500

138/2000

172/2500

207/3000

103/1500

69/1000

34.5/500

22.7

45.4

56.8

FLOW lpm/gpm

PRESSURE DROP bar/psi

11.4

34.1

 to  at 1.2A Current

32 cSt/150 sus oil at 40°C

2.8/40

2.1/30

1.4/20

0.7/10

0.76

0.2

1.52

0.4

1.90

0.5

FLOW lpm/gpm

PRESSURE DROP bar/psi

0.38

0.1

1.14

0.3

PERFORMANCE

(Continued)

U.S. Patent 7,921,880

Recommended Electronic Controllers:

See page 2.001.1 or our Electronics catalog.

SPCL10-30__ - __ __ __ - __ - __ __ __ __ __

Porting

Cartridge Only 0

Seals

Buna N (Std.) N

Fluorocarbon V

Polyurethane P

Voltage

0 Less Coil**

12 12 VDC

20 20 VDC

†

24 24 VDC

**Includes D-Coil Nut

For Coils with Zener Diode, add “/Z” to option code.

For example: “ER/Z”. Not available on all models.

See coil option info. on pages 3.200.1 & 3.400.1

Coil Termination E-Coil D-Coil

Deutsch DT04-2P ER (IP69K) DR (IP65)

Metri-Pack

150 EY (IP69K) DY (IP65)

Dual Lead Wires EL (IP69K) DL (IP65)

Amp Jr. Timer EJ (IP67) —

DIN 43650 EG (IP65) DG (IP65)

Dual Spades — DS (IP65)

Option

None (Blank)

Manual Override M

Manual Override Y

Manual Override J

For Manual Override details

see page 1.001.1

Note: Flow performance varies

with manual override options.

Consult factory for details.

Blue rectangles are links to other catalog pages.