DESCRIPTION

A proportional solenoid-operated, two-way, spool-type, normally open, bi-directional,

screw-in hydraulic cartridge valve.

OPERATION

When de-energized, the SP10-25 allows flow from 2 to 1 or from 1 to 2. When

partially energized, the valve begins to throttle the flow in either direction. When fully

energized, flow is blocked in either direction.

External circuitry is required to ramp current.

Note: If low voltage is expected on the machine, 12 or 24 volt systems will

require the use of 10 volt or 20 volt coils respectively. See “SP Valves and Coil

Operating Parameters,” page 2.002.1.

FEATURES

• Industry-common cavity.

• Continuous-duty rated coils.

• Hardened precision spool and cage for long life.

• Optional waterproof E-Coils rated up to IP69K.

RATINGS

Operating Pressure: 207 bar (3000 psi)

Electrical Parameters:

Coil

Typical Max.

Current (amp) at 0 gpm

Typical Resistance

±5% at 20°C (ohms)

12 VDC 24 VDC 12 VDC 24 VDC

D-Coil 1.20 amp 0.60 amp 7.2 ±3% 28.8 ±5%

E-Coi

1.40 amp 0.70 amp 7.09 ±3% 28.5 ±5%

Flow Rating: 18.9 lpm (5 gpm)

Max. Internal Leakage: 196 cc/minute (10 cu. in./minute) at 207 bar (3000 psi)

Operating Temperature: -40 to 100°C (-40° to 212°F) with standard Buna N seals

-26 to 204°C (-15°F to 400°F) with Viton seals

-54 to 107°C (-65°F to 225°F) with Polyurethane seals

Filtration: See page 9.010.1

Fluids: Mineral-based or synthetics with lubricating properties at viscosities of

7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1

Installation: No Restrictions. See page 9.020.1

Cavity: VC10-2; See page 9.110.1;

Cavity Tool: CT10-2XX; See page 8.600.1

Seal Kit: SK10-2X-M; See page 8.650.1

Coil Nut: Part No. 7004400

ELECTRO-PROPORTIONAL VALVES—FLOW CONTROL

ISO SYMBOL

2.029.1

PERFORMANCE

HYDRAFORCE

.com

SP10-25 Proportional, Spool, 2-Way, Normally Closed

3.4/50

6.9/100

10.3/150

13.8/200

17.2/250

20.7/300

7.6

3.8

15.9

11.4

18.9

22.7

FLOW lpm/gpm

PRESSURE bar/psi

Pressure Drop (No Coil Current)

2 to 1

1 to 2

Flow vs. Current 10.3 bar (150 psi)

with Compensator EC10-32-0-N-150

Flow 1–2

—

; Flow 2–1 – – –

3.8/1.0

7.6/2.0

11.4/3.0

18.9/5.0

15.9/4.0

0.1 0.2 0.40.3 0.5 0.8 0.9 1.0 1.1 1.20.6 0.7

Amps:

FLOW lpm/gpm

3.8/1.0

7.6/2.0

11.4/3.0

18.9/5.0

15.1/4.0

Flow vs. Current

34.5 bar (500 psi): Flow 1–2

—

; Flow 2–1 – – –

207 bar (3000 psi): Flow 1–2 - - - -; Flow 2–1 — - —

0.1 0.2 0.40.3 0.5 0.8 0.9 1.0 1.1 1.20.6 0.7

Amps:

FLOW lpm/gpm

40302010 70 80 90 10050 60

% of Max.

Control Current:

40302010 70 80 90 10050 60

% of Max.

Control Current:

Increasing Current

Upper Curves

Decreasing Current

Lower Curves

Increasing Current

Upper Curves

Decreasing Current

Lower Curves

Graphs based

on 12 VDC "D"

coil current.

NOTE: Curves

shown are at

constant pressure.

Limiting flow to the

valve or significant

changes in dif-

ferential pressure

will change valve

performance.

Without a pressure

compensator, the

valve requires a

minimum of 250

psid to achieve

stable control of

the spool as shown

on the flow vs.

current graphs.

Blue rectangles are links to other catalog pages.

SP10-25

2.029.2

DIMENSIONS

HYDRAFORCE

.com

PERFORMANCE (cont’d.)

Recommended Electronic Controllers:

See page 2.001.1 or our Electronics catalog.

1.62

41.1

1.84

DIA.

46.7

E-Coil

View

Standard

Coil View

2.38

60.3

2.38

60.3

5-7 ft-lbs

(6.8-9.4 Nm)

ACROSS FLATS

1.00 in./25.4 mm

TORQUE

5-7 ft-lbs

(6.8-9.4 Nm)

MATERIALS

Cartridge: Weight: 0.17 kg.

(0.371 lbs.) Steel with hardened

work surfaces. Zinc-plated

exposed surfaces Buna N

O-rings and back-ups standard.

Standard Ported Body: Weight:

0.16 kg. (0.35 lbs.) Anodized

high-strength 6061 T6 aluminum

alloy, rated to 207 bar (3000

psi). Ductile iron bodies avail-

able; dimensions may differ.

See page 8.010.1.

Standard D-Coil: Weight: 0.27 kg.

(0.60 lbs.) Unitized thermoplas-

tic encapsulated, Class H high

temperature magnetwire.

See page 3.200.1

E-Coil: Weight: 0.41 kg. (0.9 lbs.)

Perfect wound, fully encapsu-

lated with rugged external metal

shell. Rated up to IP69K with

integral connectors.

See page 3.400.1

SP10-25__ - __ __ __ - __ - __ __ __ __ __

TO ORDER

Porting

Cartridge Only 0

SAE 6 6T

SAE 8 8T

1/4 in. BSP* 2B

3/8 in. BSP* 3B

1/2 in. BSP* 4B

*BSP Body; U.K. Mfr. Only

Voltage

**Less Coil 0

†

10 VDC 10

12 VDC 12

†

20 VDC 20

24 VDC 24

Seals

Buna N (Std.) N

Fluorocarbon V

Polyurethane P

Option

None

(Blank)

For Coils with Zener Diode, add “/Z” to option code.

For example: “ER/Z”. Not available on all models.

See coil option info. on pages 3.200.1 & 3.400.1

Coil Termination E-Coil D-Coil

Deutsch DT04-2P ER (IP69K) DR (IP65)

Metri-Pak 150 EY (IP69K) DY (IP65)

Dual Lead Wires EL (IP69K) DL (IP65)

Amp Jr. Timer EJ (IP67) —

DIN 43650 EG (IP65) DG (IP65)

Dual Spades — DS (IP65)

**Includes Coil Nut and Spacer.

†

10 and 20 VDC coils should be used

for most continuous-duty applications.

Consult factory.

Reverse Flow Check

5.7/1.5

9.5/2.5

11.4/3.0

13.2/3.5

15.9/4.0

17.0/4.5

18.9/5.0

20.8/5.5

500

1000

103

1500

207

3000

172

2500

138

2000

PRESSURE bar/psi

FLOW lpm/gpm

Pressure Response

12 VDC D-Coil Amps

Port 1 to 2 ——; Port 2 to 1 - - - -

3.8/1.0

1.9/0.5

7.6/2.0

0 A

0.50 A

0.75 A

0.25 A

Blue rectangles are links to other catalog pages.