DESCRIPTION
A proportional solenoid-operated, 2-way, poppet-type, normally open, screw-in
hydraulic cartridge valve for low-leakage blocking and load-holding applications
and for starting or stopping a load or a pump system..
OPERATION
When de-energized, the SP10-21 allows flow from 2 to 1. When the valve is partially
energized, the valve begins to throttle the flow from 2 to 1. When fully energized, the
poppet closes on the seat, blocking flow from 2 to 1. Flow from 1 to 2 will occur when
hydraulic pressure exceeds the solenoid force.
Note: If low voltage is expected on the machine, 12 or 24 volt systems will
require the use of 10 volt or 20 volt coils respectively. See “SP Valves and Coil
Operating Parameters,” page 2.002.1.
FEATURES
• Industry-common cavity. • Efficient wet-armature construction.
• Continuous-duty rated coils. • Optional waterproof E-Coils rated up to IP69K.
RATINGS
Operating Pressure: 250 bar (3625 psi)
Operating Voltage: See Performance Chart
Minimum Operating Dither/Pulse Frequency: 70 Hz
Flow: 0 to 60.6 lpm (0 to 16 gpm)
Max. Internal Leakage: 5 drops per minute at 207 bar (3000 psi)
Temperature: -40 to 120°C with standard Buna seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No Restrictions. See page 9.020.1
Cavity: VC10-2; See page 9.110.1; Cavity Tool: CT10-2XX; See page 8.600.1
Seal Kit: SK10-2X-T; See page 8.650.1
Coil Nut: Part No. 7004400
ELECTRO-PROPORTIONAL VALVES—FLOW CONTROL
SP10-21 Poppet, 2-Way, Normally Open
SYMBOL
USASI/ISO:
2.021.1
PERFORMANCE
Note: Electronic Controller is required to ramp current.
HYDRAFORCE
.com
®
1.4/20
2.8/40
4.1/60
5.5/80
6.9/100
8.3/120
9.7/140
11.0/160
12.4/180
15.1
4
7.6
2
30.3
8
22.7
6
37.9
10
60.6
16
45.4
12
53.0
14
PRESSURE bar/psi
TYPICAL WIDE OPEN
PRESSURE DROP 2 to 1
7.6/2
15.1/4
22.7/6
30.3/8
37.9/10
45.4/12
90.9/24
83.3/22
75.7/20
68.1/18
60.6/16
53.0/14
98.4/26
106.0/28
0.1 0.2
30 40 50 60 70 80 90 100
0.40.3 0.5 0.8 0.9
A
B
D
1.0 1.1 1.20.6 0.7
Amps:
% of Max. Control Current:
FLOW lpm/gpm
FLOW vs. CURRENT with 12 VDC D-Coil
Consult factory for E-Coil
C
A: 207 bar/3000 psi
B: 104 bar/1500 psi
C: 35 bar/500 psi
D: 11 bar/160 psi
Performance
charts
continued
on next page.
Blue rectangles are links to other catalog pages.