DESCRIPTION

A high pressure proportional solenoid-operated, two-way, piloted, poppet-type, nor-

mally closed, screw-in hydraulic cartridge valve for low-leakage blocking and load-

holding applications.

OPERATION

When de-energized, the HSP10-20 blocks flow from ports 2 to 1. In this mode, the

cartridge will allow flow from ports 1 to 2 after overcoming the spring forces (see

Performance graph). When energized, the valve will allow flow proportional to the

applied current from ports 2 to 1 while severely restricting flow from ports 1 to 2.

Note: If low voltage is expected on the machine, 12 or 24 volt systems will

require the use of 10 volt or 20 volt coils respectively. See “SP Valves and Coil

Operating Parameters,” page 2.002.1.

FEATURES

• Industry-common cavity.

• Efficient wet-armature construction.

• Continuous-duty rated coils.

• Waterproof E-Coils rated up to IP69K.

• Manual override option.

• All HyPerformance products are tested to the rigorous standards

of the NFPA specification T2.6.1.

• All HyPerformance valves are tested at a verification level of 90%

and an assurance of 99%.

RATINGS

Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)

Flow Rating: 53 lpm (14 gpm) with 11 bar (160 psi) compensation; 34 lpm (9 gpm)

with 5.5 bar (80 psi) compensation

Max. Internal Leakage: 5 drops per minute at 350 bar (5075 psi) at port 2

Cycle Life: One million cycles

Temperature: -54° to 107°C (-65° to 225°F) with urethane seals

Fluids: Mineral-based or synthetics with lubricating properties at viscosities of

7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1

Filtration: See page 9.010.1; Installation: No Restrictions. See page 9.020.1

Cavity: HVC10-2; See page 9.110.1; Cavity Tool: HCT10-2XX; See page 8.600.1

Seal Kit: HSK10-2U-0 Urethane; See page 8.650.1

Coil Nut: Part No. 4553800; for E-coils manuf. prior to 1-1-04, see page 3.400.1.

ELECTRO-PROPORTIONAL VALVES—FLOW CONTROL

HSP10-20 HyPerformance™ Proportional, Poppet, 2-Way,

2.011.1

ISO SYMBOL

CURRENT (amps)

1.2 amps = 100% of Max. Control Current

FLOW (lpm/gpm)

Flow vs. Current, 242 bar (3000 psi)

Inlet with No Compensation

100 Hz Dither Frequency

0.4 0.6 0.8 1.0 1.20.20

227/60

189/50

151/40

114/30

76/20

38/10

PERFORMANCE

CURRENT (amps)

1.2 amps = 100% of Max. Control Current

FLOW (lpm/gpm)

Flow vs. Current

With Compensation

100 Hz Dither Frequency

0.4 0.6 0.8 1.0 1.20.20

60.6/16

53.0/14

45.4/12

37.9/10

30.3/8

22.7/6

7.6/2

15.0/4

160 psi

Compensated

80 psi

Compensated

Pressure Drop vs. Flow

32 cSt/150 sus oil at 40°C

69/1000

55/800

41/600

28/400

14/200

1.00 A

0.70 A

1.24 A

FLOW lpm/gpm

PRESSURE DROP bar/psi

De-Energized 1–2

HYDRAFORCE

.com

Blue rectangles are links to other catalog pages.

HSP10-20

2.011.2

DIMENSIONS

COIL MUST BE

INSTALLED WITH

LETTERING UP

3.25

ORIFICE DISC CANNOT

BE USED WITH

THIS PRODUCT

due to HyPerformance

Cavity.

82.5

1.00

ACROSS FLATS

25.4

0.75

ACROSS FLATS

‘T’-Type

Manual Override

19.0

1.31

TORQUE: 5 – 7 ft-lb.

6.8 – 9.5 Nm

TORQUE:

75 – 85 ft-lb.

102 – 115 Nm

33.3

0.75

19.1

1.50

38.1

2.54

64.5

2.00

50.8

0.281 (7.1 mm)

Dia. Mounting

Holes (2)

2.43

61.7

1.62/41.1

1.00/25.4

2.43/61.7

1.84/46.7 DIA.

0.20/5.1

1.63/41.3

MATERIALS

Cartridge: Weight: 0.18 kg.

(0.4 lbs.) without coil and nut.

Steel with hardened work

surfaces. Zinc-plated exposed

surfaces. PPDI Urethane seals

without back-ups standard.

Standard Ported Body: Weight:

1.18 kg. (2.62 lbs.) HyPerfor-

mance™ Ductile iron (code 'D')

standard. Rated to 345 bar

(5000 psi) See page 8.010.1.

E-Coil: Weight: 0.41 kg. (0.9 lbs.)

Perfect wound, fully encapsu-

lated with rugged external metal

shell. Rated up to IP69K with

integral connectors. Note: See

page 3.400.1 for all E-Coil

retrofit applications.

HSP10-20 __ - __ __ __ - __ - __ __ __ __ __

TO ORDER

Termination (VDC)

E-Coil

ER Deutsch DT04-2P

(IP69K Rated)

EY Metri-Pack

® 150.2A

(IP69K Rated)

EL Dual Leads

Porting

Cartridge Only 0

SAE 8 8TD

1/2 in. BSP* 4BD

*BSP Body; U.K. Mfr. Only

Seals

U PPDI Urethane

Consult factory for additional

seal options.

Option

None

(Blank)

Manual Override T

Voltage

0 Less Coil**

12 12 VDC

24 24 VDC

**Includes Std. Coil

Nut

Consult factory for

additional voltage

options.

Recommended Electronic Controllers:

See page 2.001.1 or our Electronics catalog.

Normally Closed

HYDRAFORCE

.com

Blue rectangles are links to other catalog pages.