DESCRIPTION
A solenoid-operated, two-position, six-way, direct-acting spool-type, screw-in hydraulic
cartridge valve. It is intended for use as a selector valve in selector or series/parallel
drive circuits.
OPERATION
When de-energized, the SV80-61 blocks fl ow to ➄ and ➅, and allows fl ow between
four and
➂, and between ➀ and ➁. When energized, the spool shifts to block fl ow to
ports
➁ and ➂, while allowing fl ow between ➃ and ➄, and between ➀ and ➅.
Note: In circuits where this valve is used as a selector valve to direct fl ow between
two cylinders of unequal area ratios, the cylinder head sides should be connected to
ports
➂ and ➄, and the rod sides to ports ➁ and ➅.
FEATURES
• Continuous-duty rated solenoid.
• Hardened parts for long life.
• Optional coil voltages and terminations.
• Optional waterproof E-Coils rated up to IP69K.
• Cartridges are voltage interchangeable.
RATINGS
Operating Pressure: 207 bar (3000 psi) with standard Buna N seals
Flow: 7.6 lpm (2 gpm) max. See performance chart
Internal Leakage: 164 ml/minute (10 cu. in./minute) at 207 bar (3000 psi)
Temperature: -40 to 120°C with standard Buna seals
Filtration: Recommend ISO 4406 16/13; See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-6; See page 9.110.1
Cavity Tool: CT10-6XX; See page 8.600.1
Seal Kit: SK80-6X-MMMMM; See page 8.650.1
Coil Nut: Part No. 7004400
SYMBOLS
1.640.1
USASI/ISO:
PERFORMANCE (Cartridge Only)
SV80-61 Spool, 6-Way, 2-Position, Selector Valve
1.4/20
2.8/40
2.1/30
0.7/10
1.2
4.5
1.6
6.1
0.8
3.0
0.4
1.5
2.0
7.6
FLOW lpm/gpm
PRESSURE DROP bar/psi
PRESSURE DROP vs. FLOW
Energized - - -; De-Energized ——
32 cSt/150 sus oil at 40°C
➅ to ➀ e
➁ to ➀ d
➃ to ➄ e
➃ to ➂ d
207/3000
138/2000
69/1000
3.0
0.8
4.5
1.2
6.1
1.6
1.5
0.4
7.6
2.0
FLOW lpm/gpm
PRESSURE bar/psi
OPERATING LIMITS
Selector Circit with Inlet at
➃,
or Series/Parallel Circuit: ////
32 cSt/150 sus oil at 40°C
207/3000
138/2000
69/1000
3.0
0.8
4.5
1.2
6.1
1.6
1.5
0.4
7.6
2.0
FLOW lpm/gpm
PRESSURE bar/psi
OPERATING LIMITS
Selector Circuit with Inlet at
➀: \\\\
32 cSt/150 sus oil at 40°C
SOLENOID VALVES
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.