DESCRIPTION
A solenoid-operated, 4-port, 3-position, direct-acting, spool-type, closed center,
screw-in hydraulic cartridge valve for use in high pressure applications.
OPERATION
When de-energized, the HSV10-47C blocks flow to all ports. When coil #1 is
energized, flow is allowed from 3 to 4, and from 2 to 1. When coil #2 is energized,
flow is allowed from 3 to 2, and from 4 to 1.
In circuits where work port flows are unequal due to cylinder ratios, the higher return
flow should be directed to port 2.
FEATURES
• Continuous-duty rated solenoid.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Manual override option.
• Waterproof E-Coils rated up to IP69K.
• All ports may be fully pressurized.
• Unitized, molded coil design.
• Industry common cavity.
• All HyPerformance™ products are tested to the rigorous standards
of the NFPA specification T2.6.1.
• All HyPerformance™ valves are tested at a verification level of 90%
and an assurance of 99%.
RATINGS
Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
Note: All HyPerformance™ products are tested for 900K cycles at 350 bar and
100K cycles at 420 bar.
Proof Pressure: 690 bar (10000 psi)
Burst Pressure: 1380 bar (20000 psi)
Flow: 37.9 lpm (10 gpm)
Internal Leakage: 245 ml/min (15 cu.in./min) at 350 bar (5075) de-energized
Temperature: -54° to 107°C (-65° to 225°F) with urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC10-4; See page 9.110.1
Cavity Tool: HCT10-4XX; See page 8.600.1
Seal Kit: SK10-4U-000; See page 8.650.1
HSV10-47C HyPerformance™ Spool, 4-Port,
ISO SYMBOL
1.522.3
PERFORMANCE (Cartridge Only)
3 to 2 2 to1
3 to 4 4 to 1
32 cSt/150 sus oil at 40°C
17.2/250
13.7/200
10.3/150
6.9/100
3.4/50
15.1
4
30.3
8
37.9
10
FLOW lpm/gpm
PRESSURE DROP bar/psi
7.6
2
22.7
6
15.14/4
11.36/3
7.57/2
3.8/1
138
2000
69
1000
207
3000
276
4000
LOAD PRESSURE bar/psi
FLOW RATING lpm/gpm
Flow Rating vs. Pressure Differential
Inlet at Port 1
Inlet at Port 3
Inlet at Port 1
345
5000
414
6000
18.93/5
22.7/6
26.5/7
30.28/8
34.07/9
37.85/10
41.64/11
Inlet at Port 3
SOLENOID VALVES
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.
DIMENSIONS
HSV10-47C
1.522.4
E-Coil
View
E-Coil
View
1.06
26.9
ACROSS
FLATS
4.57
116.0
2.51
63.8
3.38
85.7
0.75
19.1
1.62
41.1
1.26
32.0
2.56
65.0
1.84
DIA.
46.7
2.00
50.8
COIL MUST BE
INSTALLED WITH
LETTERING UP
ORIFICE DISC CANNOT
BE USED WITH THIS PRODUCT
due to HyPerformance
TM
Cavity.
TORQUE
75-85 ft. lbs.
(102-115 Nm)
HYDRAFORCE
.com
®
MATERIALS
Cartridge: Weight (without coil and
nut): 0.28 kg. (0.61 lbs.); Steel
with hardened work surfaces.
Zinc-plated exposed surfaces;
urethane seals without back-ups
standard.
Ported Body: Weight: 1.71 kg
(3.76 lbs.) HyPerformance™
Ductile iron (code 'D') standard.
Rated to 345 bar (5000 psi)
See page 8.010.1
E-Coil: Weight: 0.41 kg. (0.9 lbs.);
Perfect wound, fully encapsulated
with rugged external metal shell;
Rated up to IP69K with integral
connectors. See page 3.400.1
TO ORDER
HSV10-47C - __ __ __ - __ - __ __ __ __ __
Seals
PPDI Urethane U
Porting
Cartridge Only 0
SAE 8 8TD
3/8 in. BSP* 3BD
*BSP Body; U.K. Mfr. Only
Voltage
0 Less Coil**
10 10 VDC
12 12 VDC
24 24 VDC
** Consult factory
for other available
options.
Coil Termination
Metri-Pack EY (IP69K)
Deutsch DT04-2P ER (IP69K)
Dual Lead Wires EL (IP69K)
DIN 43650 EG (IP65)
3-Position, Closed Center
Note: PPDI Urethane seals are recommended
for pressures over 241 bar (3500 psi).
Note: Consult factory for additional seal
options.
®
HYDRAFORCE
Blue rectangles are links to other catalog pages.
