SV08-47A Spool, 4-Way, 3-Position, Tandem Center
SYMBOLS
USASI:
1.500.1
ISO:
PERFORMANCE (Cartridge Only)
13.8/200
10.3/150
6.9/100
3.4/50
1.9
0.5
5.7
1.5
3.8
1.0
7.5
2.0
9.5
2.5
11.4
3.0
FLOW lpm/gpm
PRESSURE DROP bar/psi
13.2
3.5
3 to 2 or 3 to 4 ——
2 to 1 or 4 to 1 – – –
3 to 1 - - - -
32 cSt/150 ssu oil at 40°C
276/4000
207/3000
138/2000
69/1000
3.8
1
7.5
2
11.4
3
OPERATING FLOW lpm/gpm
OPERATING PRESSURE bar/psi
15.1
4
Performance Range (Shaded)
DESCRIPTION
A solenoid-operated, four-way, three-position, direct-acting, spool-type,
tandem center, screw-in hydraulic cartridge valve.
OPERATION
When de-energized, the SV08-47A blocks cylinder ports, while allowing flow from 3 to
1. When coil #1 is energized, flow is allowed from 3 to 2, and from 4 to 1. When coil
#2 is energized, flow is allowed from 3 to 4, and from 2 to 1.
In circuits where work port flows are unequal due to cylinder ratios, the higher return
flow should be directed to port 2.
While 1 may be fully pressurized, it is not intended for use as the valve’s inlet.
Operation of Manual Override Option: To override, push the knurled knob to activate
the coil #2 (S2) function; pull the knob to activate the coil #1 (S1) function.
FEATURES
• Continuous-duty rated solenoid.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• All ports may be fully pressurized.
• Cartridges are voltage interchangeable.
• Unitized, molded coil design.
• Manual override option.
• Optional waterproof E-Coils rated up to IP69K.
RATINGS
Operating Pressure: 210 bar (3000 psi)
Flow: 11.4 lpm (3.0 gpm) max.
Internal Leakage: 278 cc/minute (17 cu. in./minute) max. at 207 bar (3000 psi)
Temperature: -40 to 120°C with standard Buna seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20°C: Standard Coil: 1.2 amps at 12 VDC; 0.13 amps at
115 VAC (full wave rectified). E-Coil: 1.4 amps at 12 VDC; 0.7 amps at 24 VDC
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-4; See page 9.108.1
Cavity Tool: CT08-4XX; See page 8.600.1
Seal Kit: SK08-4X-MMM; See page 8.650.1
Coil Nut: Part No. 7004400; Manual Override Coil Nut: Part No. 4528180;
Coil Spacer: Std D-Coil Spacer Part No. 7012940; E-Coil Spacer Part No. 4534720;
If cartridge is ordered "Less Coil," D-Coil spacer will be provided unless an E is
specified in the Coil Termination To Order section.
420
200
75
3.8
1
7.5
2
11.4
3
OPERATING FLOW lpm/gpm
VISCOSITY cSt
Fluid Viscosity vs. Flow
SOLENOID VALVES
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.