HSV10-40R HyPerformance

Spool, 4-Way, 2-Pos.

DESCRIPTION

A solenoid-operated, four-way, two-position, direct-acting, spool-type, screw-in

hydraulic cartridge valve for applications requiring high pressure operation.

OPERATION

When de-energized, the HSV10-40R allows ﬂ ow between ➁ and ➀, and between ➂

and

➃. When energized, the spool shifts to allow ﬂ ow between ➂ and ➁, and between

➃ and ➀. Consult factory for applications where port ➃ will be used as the inlet.

FEATURES

• Unitized, molded coil design, continuous-duty rated.

• Hardened precision spool and cage for long life.

• Waterproof E-Coils rated up to IP69K; optional voltages and terminations.

• Efﬁ cient wet-armature construction.

• All ports may be fully pressurized.

• Cartridges are voltage-interchangeable.

• 1000-hour salt-spray rated solenoid tubes and coils.

• All HyPerformance products are tested to the rigorous standards

of the NFPA speciﬁ cation T2.6.1.

• All HyPerformance valves are tested at a veriﬁ cation level of 90%

and an assurance of 99%.

RATINGS

Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)

Note: All HyPerformance products are tested for 900K cycles at 350 bar

and 100K cycles at 420 bar.

Burst Pressure: 1380 bar (20,000 psi)

Flow: 22.7 lpm (6 gpm) max.

Max. Internal Leakage:

Port 3 to 1, De-energized: 245 ml/minute (15 cu. in./minute.) at 350 bar (5075 psi);

Port 3 to 1, Energized: 164 ml/minute (10 cu. in./minute.) at 350 bar (5075 psi);

Port 1 to 3, De-energized: 164 ml/minute (10 cu. in./minute.) at 350 bar (5075 psi);

Port 1 to 3, Energized: 245 ml/minute (15 cu. in./minute.) at 350 bar (5075 psi)

Temperature: -54° to 107°C (-65° to 225°F) with Urethane seals.

Coil Duty Rating: Continuous from 85% to 115% of nominal voltage

Initial Coil Current Draw at 20°C: 1.7 amps at 12 VDC; 0.85 amps at 24 VDC

Filtration: See page 9.010.1

Fluids: Mineral-based or synthetics with lubricating properties at viscosities of

7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1

Installation: No restrictions; See page 9.020.1

Cavity: HVC10-4; See page 9.110.1

Cavity Tool: HCT10-4XX; See page 8.600.1

Seal Kit: SK10-4U-OOO; See page 8.650.1

Coil Nut: Part No. 4555250

SYMBOL

PERFORMANCE

(Cartridge Only)

1.409.1

SOLENOID VALVES

HYDRAFORCE

.com

6.9/100

5.5/80

4.1/60

2.8/40

1.4/20

3.8

7.6

11.3

15.1

18.9

22.7

FLOW lpm/gpm

PRESSURE DROP bar/psi

Port 2 to 1 - - - - -

All Other Paths ———

32 cSt/150 sus oil at 40°C

Blue rectangles are links to other catalog pages.

HSV10-40R

DIMENSIONS

1.409.2

HYDRAFORCE

.com

TO ORDER

HSV10-40R - __ __ __ - __ - __ __ __ __ __

Cartridge: Weight: 0.21 kg.

(0.47 lbs.); Steel with hardened

work surfaces. Zinc-plated

exposed surfaces. Urethane

O-rings without back-ups

standard.

Ported Body: Ductile iron recom-

mended for operating pressures

above 207 bar (3000 psi).

Consult Factory.

E-Coil: Weight: 0.41 kg. (0.9 lbs.);

Fully encapsulated with rugged

external metal shell. Rated up to

IP69K with integral connectors.

See page 3.400.1.

Seals

PPDI Urethane U

MATERIALS

Voltage

0 Less Coil**

12 12 VDC

24 24 VDC

**Includes Coil Nut.

Porting

Cartridge Only 0

For Coils with Zener Diode, add “/Z” to option code.

For example: “ER/Z”. Not available on all models.

See coil option info. on page 3.400.1

Coil Termination

Deutsch DT04-2P ER (IP69K)

Metri-Pak 150 EY (IP69K)

Dual Lead Wires EL (IP69K)

Amp Jr. Timer EJ (IP67)

DIN 43650 EG (IP65)

PPDI Urethane seals

recommended for pressures

above 241 bar (3500 psi).

1.62

41.1

1.84

COIL MUST BE

INSTALLED WITH

LETTERING UP

DIA.

46.7

2.85

ORIFICE DISC CANNOT

BE USED WITH THIS PRODUCT

due to HyPerformance

Cavity.

72.4

1.06

ACROSS FLATS

26.9

2.51

TORQUE: 5 – 7 ft-lb.

6.8 – 9.5 Nm

TORQUE:

75 – 85 ft-lb.

102 – 115 Nm

63.8

Blue rectangles are links to other catalog pages.