DESCRIPTION
A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic directional
valve designed for high pressure operation up to 345 bar (5000 psi).
OPERATION
When de-energized, the SV58-30 allows fl ow from ➁ to ➀ while blocking fl ow at ➂.
When energized, the cartridge’s spool shifts to open from
➂ to ➁, while blocking fl ow
out
➀.
Note: Port
➀ must be connected to tank. Valve cannot withstand more than
276 bar (4000 psi) at the inlet of port
➀.
FEATURES
• Continuous-duty rated solenoid.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Effi cient wet-armature construction.
• Cartridges are voltage interchangeable.
• Optional waterproof E-Coils rated up to IP69K.
• Unitized, molded coil design.
• Fully guided spool.
• Compact size.
RATINGS
Operating Pressure: 345 bar (5000 psi)
Flow: See Performance Chart
Internal Leakage:
Port
➂ (De-energized): 131 ml/minute (8 cu. in./minute) max. at 345 bar (5000 psi);
Port
➀ (Energized): 279 ml/minute (17 cu. in./minute) max. at 345 bar (5000 psi)
Temperature: -40 to 120°C with standard Buna seals;
-26 to 204°C with Fluorocarbon seals; -54 to 107°C with Polyurethane seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Response Time: First indication of change of state with 100% voltage supplied at
80% of nominal fl ow rating: Energized: 22 msec.; De-energized: 12 msec.
Initial Coil Current Draw at 20°C: Standard Coil: 1.2 amps at 12 VDC;
0.13 amps at 115 VAC (full wave rectifi ed);
E-Coil: 1.4 amps at 12 VDC; 0.7 amps at 24 VDC
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-3, Variation “A”; See page 9.108.1
Cavity Tool: CT08-3XX; See page 8.600.1
Seal Kit: SK58-3X-MM; See page 8.650.1
Coil Nut: Part No. 7004400;
For E-coils manufactured prior to 1-1-04, see page 3.400.1 for coil nut info.
SV58-30 Spool, 3-Way, High Pressure
SYMBOLS
USASI/ISO:
PERFORMANCE (Cartridge Only)
1.303.1
6.9/100
5.2/75
3.4/50
1.7/25
3.8
1
7.5
2
15.1
4
FLOW lpm/gpm
PRESSURE DROP bar/psi
➁ to ➀ de-energized ——
➂ to ➁ energized - - - -
32 cSt/150 sus oil at 40°C
11.4
3
8.6/125
SOLENOID VALVES
HYDRAFORCE
.com
®
11.4/3
7.6/2
3.8/1
69
1000
138
2000
207
3000
276
4000
348
5000
PRESSURE bar/psi
FLOW lpm/gpm
Operating Limits
Based on: Pull-In current of 85% of nominal
Drop-Out Current of 5% of nominal
Inlet at Port 3: Shaded
Inlet at Port 1: Hatched
Blue rectangles are links to other catalog pages.
SV58-30
DIMENSIONS
1.303.2
SV58-30__ - __ __ __ - __ - __ __ __ __ __
TO ORDER
Seals
Buna N (Std.) N
Fluorocarbon V
Polyurethane P
Termination (VDC)
Std. D-Coil
DS Dual Spades
DG DIN 43650
DL Leadwires (2)
DL/W Leads w/Weatherpak
®
Connectors
DR Deutsch DT04-2P
Termination (VAC)
Std. D-Coil
AG DIN 43650
AP 1/2 in. Conduit
Termination (VDC)
E-Coil
EG DIN 43650 –
IP65/IP67
EJ Amp Junior Timer – IP69K
EL Leadwires (2) – IP69K
ER Deutsch DT04-2P – IP69K
EY Metri-Pack® 150 – IP69K
Coils with internal diode are available.
Consult factory.
Note: This is an 08-size valve which fi ts an 08-size cavity, but uses a 10-size coil.
E-Coil
10 10 VDC
12 12 VDC
20 20 VDC
24 24 VDC
Voltage
Std. Coil
0 Less Coil**
10 10 VDC
†
12 12 VDC
24 24 VDC
36 36 VDC
48 48 VDC
24 24 VAC
115 115 VAC
230 230 VAC
**Includes Std. Coil Nut
†
DS, DG or DL
terminations only.
MATERIALS
Cartridge: Weight: 0.15 kg.
(0.32 lbs.); Steel with hardened
work surfaces. Zinc-plated
exposed surfaces; Buna N
O-rings and back-ups standard.
Standard Ported Body: Weight:
0.27 kg. (0.60 lbs.); Anodized
high-strength 6061 T6 aluminum
alloy, rated to 207 bar (3000 psi);
Ductile iron bodies available;
dimensions may differ.
See page 8.008.1.
Standard Coil: Weight: 0.27 kg.
(0.60 lbs.); Unitized thermoplastic
encapsulated, Class H high
temperature magnetwire.
See page 3.200.1.
E-Coil: Weight: 0.41 kg. (0.9 lbs.);
Perfect wound, fully encapsulated
with rugged external metal shell;
Rated up to IP69K with integral
connectors.
See page 3.400.1 for all E-Coil
retrofi t applications.
Porting
Cartridge Only 0
SAE 6 6T
1/4 in. BSP* 2B
*BSP Body; U.K. Mfr. Only
Option
None
(Blank)
®
HYDRAFORCE
HYDRAFORCE
.com
®
Polyurethane seals are required for
operation over 241 bar/3500 psi).
31.8
1.62
41.1
1.84
DIA.
46.7
2.95
74.9
2.95
74.9
E-Coil
View
Standard
Coil View
1.60
40.6
0.11
2.8
TORQUE
4 – 5 ft-lbs
(5.4 – 6.8 Nm)
TORQUE
19 – 21 ft-lbs
(25.8 – 28.5 Nm)
Blue rectangles are links to other catalog pages.
