SVCV12-20 Poppet, 2-Way, Normally Closed . . .
DESCRIPTION
A solenoid-operated, two-way, pilot-operated, poppet-type, normally closed, screw-in
hydraulic cartridge valve with outlet fl ow check, designed for low leakage in load
holding applications.
OPERATION
When de-energized, the SVCV12-20 blocks fl ow from 2 to 1 and from 1 to 2.
When energized, the cartridge’s poppet lifts to open the 2 to 1 fl ow path, while
continuing to block fl ow from 1 to 2.
The SVCV12-20 is designed to fi t into the VC12-3 cavity with the normal inlet at
cavity port 3 (valve port 2), the outlet at cavity port 1 (valve port 1), and cavity port 2
blocked. The pressure drop will be substantially higher if cavity port 2 is selected as
an alternate outlet port. At fl ows greater than 56.8 lpm (15 gpm) pressure drop will be
lower if the optional port 2 is connected to port 1.
FEATURES
• Continuous-duty rated coil.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Cartridges are voltage interchangeable.
• Optional waterproof E-Coils rated up to IP69K.
• Cost effective cavity.
RATINGS
Operating Pressure: 240 bar (3500 psi)
Rated Flow: 113.6 lpm (30 gpm)
Maximum Internal Leakage: 2 to 1: 5 drops/minute at 207 bar (3000 psi);
1 to 2: 5 drops/minute at 207 bar (3000 psi)
Temperature: -40 to 100°C (-40° to 212°F) with standard Buna N seals
-26 to 204°C (-15°F to 400°F) with Fluorocarbon seals
-54 to 107°C (-65°F to 225°F) with Polyurethane seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20°C: Standard Coil: 1.67 amps at 12 VDC;
0.13 amps at 115 VAC (full wave rectifi ed);
E-Coil: 1.7 amps at 12 VDC; 0.8 amps at 24 VDC
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC12-3; See page 9.112.1
Cavity Tool: CT12-3XX; See page 8.600.1
Seal Kit: SK12-2X-M; See page 8.650.1
Coil Nut: Part No. 7004400
SYMBOL
PERFORMANCE (Cartridge Only)
1.117.7
SOLENOID VALVES
17.2/250
13.8/200
10.3/150
6.9/100
3.4/50
56.8
15
37.9
10
18.9
5
75.7
20
94.6
25
FLOW lpm/gpm
PRESSURE DROP bar/psi
Cartridge and Body
32 cSt/150 sus oil at 40°C
113.6
30
20.7/300
24.1/350
Port 3 to Port 1
(Port 2 Blocked)
Port 3
to
Ports 1 & 2
Combined
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.