SV38-26 Blocking/Low Flow, 2-Way, Normally Closed
USASI/ISO:
SYMBOLS
1.081.1
DESCRIPTION
A solenoid-operated, 2-way, normally closed, direct-acting, needle-type, screw-in
hydraulic cartridge valve, designed to function as a blocking or load-holding device
for low fl ow circuits.
OPERATION
When de-energized, the SV38-26 blocks fl ow in both directions, to pressure rating.
If pressure on
➀ exceeds the rating, fl ow may pass from ➀ to ➁.
When energized, the needle point lifts to open the valve bidirectionally. Port
➁ is the
recommended load-holding port.
Operation of Manual Override Option: To override, push button in, twist counter-
clockwise 180° and release. In ths position, the valve will remain open.
To return to normal operation, push button in, twist clockwise 180° and release.
Override will be detented in this position
FEATURES
• Continuous-duty rated solenoid.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Cartridges are voltage interchangeable.
• Unitized, molded coil design.
• Industry common cavity.
• Manual override option.
• Optional waterproof E-Coils rated up to IP69K.
RATINGS
Operating Pressure: 207 bar (3000 psi)
Proof Pressure: 520 bar (7540 psi)
Internal Leakage: 0.10 cc/minute (2 drops/minute) max. at 207 bar (3000 psi)
Temperature: -40 to 120°C with standard Buna seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Response Time: First indication of change of state with 100% voltage supplied at
80% of nominal fl ow rating: Energized: 22 msec.; De-energized: 5 msec.
Initial Coil Current Draw at 20°C: Standard Coil: 1.67 amps at 12 VDC;
0.18 amps at 115 VAC (full wave rectifi ed).
E-Coil: 1.7 amps at 12 VDC; 0.85 amps at 24 VDC
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-2; See page 9.108.1
Cavity Tool: CT08-2XX; See page 8.600.1
Seal Kit: SK08-2X-M; See page 8.650.1
Coil Nut: Part No. 7004400;
For E-coils manufactured prior to 1-1-04, see page 3.400.1 for coil nut info.
34.5/500
27.6/400
20.7/300
13.8/200
1.14
0.3
3.4
0.9
FLOW lpm/gpm
PRESSURE DROP bar/psi
6.9/100
➁ to ➀ or ➀ to ➁ energized
32 cSt/150 sus oil at 40°C
2.3
0.6
PERFORMANCE (Cartridge Only)
SOLENOID VALVES
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.