HSV10-25 HyPerformance
TM
Spool, 2-Way, N.O.
DESCRIPTION
A solenoid-operated, 2-way, normally open, spool-type, screw-in hydraulic
cartridge valve, designed to function as a bi-directional blocking valve in high
pressure applications.
OPERATION
When de-energized, the HSV10-25 allows flow in both directions.
When energized, the cartridge’s spool shifts to close the bidirectional flow path.
FEATURES
• Continuous-duty rated solenoid.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Both ports may be fully pressurized.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Waterproof E-Coils rated up to IP69K.
• 1000-hour salt-spray rated solenoid tubes and coils.
• Unitized, molded coil design.
• All HyPerformance products are tested to the rigorous standards
of the NFPA specification T2.6.1.
• All HyPerformance valves are tested at a verification level of 90%
and an assurance of 99%.
RATINGS
Operating Pressure: 350 bar (5075 psi); 10% Cycle Life: 420 bar (6090 psi)
Note: All HyPerformance products are tested for 900K cycles at 350 bar
and 100K cycles at 420 bar.
Burst Pressure: 1380 bar (20,000 psi)
Flow: Up to 30.3 lpm (8 gpm)
Internal Leakage: 2 to 1 Direction: 131 ml/minute (8 cu. in./minute) max. at 350 bar
(5075 psi); 1 to 2 Direction: 279 ml/minute (17 cu. in./minute) at 350 bar (5075 psi)
Temperature: -54° to 107°C (-65° to 225°F) with Urethane seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Response Time: First indication of change of state with 100% voltage supplied at
80% of nominal flow rating: Energized: 40 msec.; De-energized: 32 msec.
Initial Coil Current Draw at 20°C: 1.7 amps at 12 VDC; 0.85 amps at 24 VDC
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC10-2; See page 9.110.1
Cavity Tool: HCT10-2xx; See page 8.600.1
Seal Kit: SK10-2U-O; See page 8.650.1
Coil Nut: Part No. 4555250
USASI/ISO:
1.077.1
SYMBOLS
PERFORMANCE
(Cartridge Only)
SOLENOID VALVES
HYDRAFORCE
.com
®
3.4/50
4.1/60
4.8/70
5.5/80
2.8/40
2.1/30
1.4/20
0.7/10
7.6
2
15.1
4
22.7
6
FLOW lpm/gpm
PRESSURE DROP bar/psi
Both Directions
32 cSt/150 sus oil at 40°C
30.3
8
Blue rectangles are links to other catalog pages.
HSV10-25
DIMENSIONS
1.017.2
TO ORDER
HSV10-25__ - __ __ __ - __ - __ __ __ __ __
Option
None (Blank)
Cartridge: Weight: 0.19 kg.
(0.41 lbs.); Steel with hardened
work surfaces. Zinc-plated
exposed surfaces. Urethane
O-rings without back-up standard.
Ported Body:
Weight: 1.19 kg.
(2.62 lbs.); HyPerformance™
Ductile iron (code ‘D’) standard.
Rated to 345 bar (5000 psi).
E-Coil: Weight: 0.41 kg. (0.9 lbs.);
Fully encapsulated with rugged
external metal shell. Rated up to
IP69K with integral connectors.
See page 3.400.1.
Porting
Cartridge Only 0
SAE 8 8TD
1/2 in. BSP* 4BD
*BSP Body; U.K. Mfr. Only
Seals
PPDI Urethane U
MATERIALS
®
HYDRAFORCE
HYDRAFORCE
.com
®
Voltage
0 Less Coil**
10 10 VDC
12 12 VDC
20 20 VDC
24 24 VDC
For Coils with Zener Diode, add “/Z” to option code.
For example: “ER/Z”. Not available on all models.
See coil option info. on page 3.400.1.
**Includes E-Coil Nut.
Coil Termination
Deutsch DT04-2P ER
(IP69K)
Metri-Pak 150 EY (IP69K)
Dual Lead Wires EL (IP69K)
Amp Jr. Timer EJ (IP67)
DIN 43650 EG (IP65)
Recommended for pressures
above 241 bar (3500 psi).
COIL MUST BE
INSTALLED WITH
LETTERING UP
2.85
72.4
1.06
ACROSS FLATS
26.9
1.31
TORQUE: 5 – 7 ft-lb.
TORQUE:
75 – 85 ft-lb.
33.3
ORIFICE DISC CANNOT
BE USED WITH THIS PRODUCT
due to HyPerformance
TM
Cavity.
0.75
19.1
1.50
38.1
1.62
41.1
1.00
25.4
2.43
61.7
1.84
DIA.
46.7
2.00
50.8
0.20
0.281 (7.1 mm)
Dia. Mounting
Holes (2)
5.1
1.63
41.3
2.43
61.7
6.8 – 9.5 Nm
102 – 115 Nm
Blue rectangles are links to other catalog pages.
