HSV10-24 HyPerformance
TM
Spool, 2-Way
DESCRIPTION
A solenoid-operated, 2-way, spool-type, screw-in hydraulic cartridge valve, designed
to function as a bi-directional blocking valve in high pressure applications.
OPERATION
When de-energized, the HSV10-24 blocks flow in both directions. When energized,
the valve opens to allow bi-directional flow.
FEATURES
• Continuous-duty rated solenoid.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Waterproof E-Coils rated up to IP69K.
• 1000-hour salt-spray rated solenoid tubes and coils.
• Unitized, molded coil design.
• All HyPerformance products are tested to the rigorous standards
of the NFPA specification T2.6.1.
• All HyPerformance valves are tested at a verification level of 90%
and an assurance of 99%.
RATINGS
Operating Pressure: 350 bar (5075 psi); 10% Cycle Life: 420 bar (6090 psi)
Note: All HyPerformance products are tested for 900K cycles at 350 bar
and 100K cycles at 420 bar.
Burst Pressure: 1380 bar (20,000 psi)
Flow: Up to 30.3 lpm (8 gpm)
Internal Leakage: Port 2 to 1: 82 ml/minute (5 cu. in/minute) max. at 350 bar (5075
psi); Port 1 to 2: 279 ml/minute (17 cu. in/minute) max. at 350 bar (5075 psi)
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20°C: 1.7 amps at 12 VDC; 0.85 amps at 24 VDC
Temperature: -54° to 107°C (-65° to 225°F) with Urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC10-2; See page 9.110.1
Cavity Tool: HCT10-2xx; See page 8.600.1
Seal Kit: SK10-2U-O; See page 8.650.1
Coil Nut: Part No. 4555250
1.064.3
SYMBOL
PERFORMANCE
(Cartridge Only)
SOLENOID VALVES
HYDRAFORCE
.com
®
6.9/100
8.3/120
9.7/140
11.0/160
5.5/80
4.1/60
2.8/40
1.4/20
7.6
2
15.1
4
22.7
6
FLOW lpm/gpm
PRESSURE DROP bar/psi
Port 1 to 2 ——; Port 2 to 1 - - - -
32 cSt/150 sus oil at 40°C
30.3
8
Blue rectangles are links to other catalog pages.