DESCRIPTION
A solenoid-operated, 2-way, normally open, poppet-type, screw-in hydraulic cartridge
valve, designed to function as a load holding or blocking valve in applications requir-
ing low internal leakage at high pressure.
OPERATION
When de-energized, the SF08-23 poppet lifts to open from ➁ to ➀. In this mode, fl ow
is also allowed from
➀ to ➁.
When energized, the cartridge acts as a check valve, blocking fl ow from
➁ to ➀ after
overcoming the solenoid force (requires 3.4 to 10.3 bar / 50 to 150 psi).
Operation of Manual Override Option: To override, push and hold override button.
FEATURES
• Continuous-duty rated solenoid.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Effi cient wet-armature construction.
• Cartridges are voltage interchangeable.
• Unitized, molded coil design.
• Manual override option.
• Optional waterproof E-Coils rated up to IP69K.
• Industry common cavity.
RATINGS
Operating Pressure: 345 bar (5000 psi)
Flow: See Performance Chart
Internal Leakage: 0.15 cc/minute (3 drops/minute) max. at 345 bar (5000 psi)
Temperature: -40 to 100°C with standard polyurethane seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20°C: Standard Coil: 1.2 amps at 12 VDC;
0.13 amps at 115 VAC (full wave rectifi ed).
E-Coil: 1.4 amps at 12 VDC; 0.7 amps at 24 VDC
Minimum Pull-in Voltage: 85% of nominal at 345 bar (5000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-2; See page 9.108.1
Cavity Tool: CT08-2XX; See page 8.600.1
Seal Kit: SK08-2P-T; See page 8.650.1
Coil Nut: Part No. 7004410;
For E-coils manufactured prior to 1-1-04, see page 3.400.1 for coil nut info.
SF08-23 Poppet, 2-Way, Normally Open
USASI: ISO:
PERFORMANCE (Cartridge Only)
1.051.1
6.9/100
13.8/200
17.2/250
10.3/150
20.7/300
3.4/50
7.5
2
15.1
4
22.7
6
30.2
8
FLOW lpm/gpm
PRESSURE DROP bar/psi
37.9
10
to ~ de-energized ——
~ to energized - - - -
32 cSt/150 sus oil at 40°C
SYMBOLS
Note: This valve, the SF08-23, replaces the SV58-23 which is now obsolete.
For more information consult factory.
SOLENOID VALVES
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.