HSV10-22 HyPerformance

Poppet, 2-Way, N.C.

DESCRIPTION

A solenoid-operated, 2-way, normally closed, piloted, poppet-type, screw-in hydraulic

cartridge valve, designed for load holding in high pressure applications requiring low

internal leakage.

OPERATION

When de-energized, the HSV10-22 blocks flow from 2 to 1. In this mode the valve will

allow flow from 1 to 2 after overcoming the spring forces. When energized, the valve

will allow flow bi-directionally.

Operation of Manual Override Option: For normal operation (de-energized) the

manual override pin must be seated in the lower detent groove. To shift the valve

manually, the operator pushes down on the knob and rotates 180° in either direction.

When the manual override is actuated, increased flow can be achieved by pulling on

the knob.

FEATURES

• Continuous-duty rated solenoid.

• Hardened seat for long life and low leakage.

• Optional coil voltages and terminations.

• Efficient wet-armature construction.

• Cartridges are voltage interchangeable.

• Waterproof E-Coils rated up to IP69K.

• 1000-hour salt-spray rated solenoid tubes and coils.

• Unitized, molded coil design.

• All HyPerformance products are tested to the rigorous standards

of the NFPA specification T2.6.1.

• All HyPerformance valves are tested at a verification level of 90%

and an assurance of 99%.

RATINGS

Operating Pressure: 350 bar (5075 psi); 10% Cycle Life: 420 bar (6090 psi)

Note: All HyPerformance products are tested for 900K cycles at 350 bar

and 100K cycles at 420 bar.

Burst Pressure: 1380 bar (20,000 psi)

Flow: Up to 75.7 lpm (20 gpm)

Internal Leakage: 0.25 cc/minute (5 drops/minute) max. with 350 bar (5075 psi)

at port 2.

Temperature: -54° to 107°C (-65° to 225°F) with Urethane seals

Coil Duty Rating: Continuous from 85% to 115% of nominal voltage

Response Time: First indication of change of state with 100% voltage supplied at

80% of nominal flow rating: Energized: 40 msec.; De-energized: 32 msec.

Initial Coil Current Draw at 20°C: 1.7 amps at 12 VDC; 0.85 amps at 24 VDC

Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)

Filtration: See page 9.010.1

Fluids: Mineral-based or synthetics with lubricating properties at viscosities of

7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1

Installation: No restrictions; See page 9.020.1

Cavity: HVC10-2; See page 9.110.1

Cavity Tool: HCT10-2xx; See page 8.600.1

Seal Kit: SK10-2U-O; See page 8.650.1

Coil Nut: Part No. 4553800

1.043.1

SYMBOL

PERFORMANCE

(Cartridge Only)

SOLENOID VALVES

HYDRAFORCE

.com

10.3/150

12.4/180

14.5/210

16.6/240

8.3/120

6.2/90

4.1/60

2.1/30

18.9

37.9

56.8

FLOW lpm/gpm

PRESSURE DROP bar/psi

Port 2 to 1, energized ——

Port 1 to 2, de-energized - - - -

Port 1 to 2, energized — —

32 cSt/150 sus oil at 40°C

75.7

Blue rectangles are links to other catalog pages.

HSV10-22

DIMENSIONS

1.043.2

TO ORDER

HSV10-22__ - __ __ __ - __ - __ __ __ __ __

Option

None

(Blank)

Manual Override M

Cartridge: Weight: 0.19 kg.

(0.41 lbs.); Steel with hardened

work surfaces. Zinc-plated

exposed surfaces. Urethane

O-rings without back-up standard.

Ported Body: Weight: 1.19 kg.

(2.62 lbs.); HyPerformance™

Ductile iron (code ‘D’) standard.

Rated to 345 bar (5000 psi).

E-Coil: Weight: 0.41 kg. (0.9 lbs.);

Fully encapsulated with rugged

external metal shell. Rated up to

IP69K with integral connectors.

See page 3.400.1.

Porting

Cartridge Only 0

SAE 8 8TD

1/2 in. BSP* 4BD

*BSP Body; U.K. Mfr. Only

Seals

PPDI Urethane U

MATERIALS

HYDRAFORCE

.com

Voltage

0 Less Coil**

10 10 VDC

12 12 VDC

20 20 VDC

24 24 VDC

For Coils with Zener Diode, add “/Z” to option code.

For example: “ER/Z”. Not available on all models.

See coil option info. on page 3.400.1

Coil Termination

Deutsch DT04-2P ER (IP69K)

Metri-Pak 150 EY (IP69K)

Dual Lead Wires EL (IP69K)

Amp Jr. Timer EJ (IP67)

DIN 43650 EG (IP65)

**Includes E-Coil Nut.

Recommended for pressures

above 241 bar (3500 psi).

0.75

19.1

1.50

38.1

1.00

25.4

2.43

61.7

2.00

50.8

0.20

0.281 (7.1 mm)

Dia. Mounting

Holes (2)

5.1

1.63

41.3

2.43

61.7

TORQUE:

75 – 85 ft-lb.

102 – 115 Nm

TORQUE: 5 – 7 ft-lb.

6.8 – 9.5 Nm

COIL MUST BE

INSTALLED WITH

LETTERING UP

2.54

ORIFICE DISC CANNOT

BE USED WITH THIS PRODUCT

due to HyPerformance

Cavity.

64.5

18.3

1.06

ACROSS FLATS

26.9

1.31

33.3

1.62

41.1

0.92

23.4

0.72

Blue rectangles are links to other catalog pages.