227
E 7.565.1/03.12
Pressure Filter DFM
with Differential Pressure
Relief Valve
up to 280 l/min, up to 400 bar
1. TECHNICAL
SPECIFICATIONS
1.1 FILTER HOUSING
Construction
The lter housings are designed
in accordance with international
regulations. They consist of a lter
head and a screw-in lter bowl.
Standard equipment:
differential pressure controlled relief
valve
connection for a clogging indicator
1.2 FILTER ELEMENTS
HYDAC lter elements are validated
and their quality is constantly
monitored according to the following
standards:
ISO 2941
ISO 2942
ISO 2943
ISO 3724
ISO 3968
ISO 11170
ISO 16889
Contamination retention capacities
in g
Betamicron
®
BH4HC
DFM 3 µm 5 µm 10 µm 20 µm
160 12.9 12.6 13.9 15.9
240 21.6 21.1 23.2 26.5
280 48.1 47.1 51.8 59.1
Filter elements are available with the
following pressure stability values:
Betamicron
®
(BH4HC): 210 bar
1.4 SEALS
NBR (= Perbunan)
1.5 INSTALLATION
As inline lter
1.6 SPECIAL MODELS AND
ACCESSORIES
With pressure release / oil drain plug
(SO184)
1.7 SPARE PARTS
See Original Spare Parts List
1.8 CERTIFICATES AND APPROVALS
On request
1.9 COMPATIBILITY WITH
HYDRAULIC FLUIDS ISO 2943
Hydraulic oils H to HLPD DIN 51524
Lubrication oils DIN 51517, API,
ACEA, DIN 51515, ISO 6743
Compressor oils DIN 51506
Biodegradable operating uids VDMA
24568 HETG, HEES, HEPG
Fire-resistant uids HFA, HFB, HFC
and HFD
Operating uids with high water
content (>50% water content) on
request
1.10 MAINTENANCE INSTRUCTIONS
Filter housings must be earthed.
When using electrical clogging
indicators, the electrical power supply
to the system must be switched off
before removing the clogging indicator
connector.
1.3 FILTER SPECIFICATIONS
Nominal pressure 400 bar
Fatigue strength At nominal pressure 10
6
cycles
from 0 to nominal pressure
Temperature range -30 °C to +100 °C
(-30 °C to -10 °C: p
max
= 200 bar)
Material of lter head EN-GJS-400-15
Material of lter bowl Steel
Type of clogging indicator VD (differential pressure measurement
up to 420 bar operating pressure)
Pressure setting of the clogging indicator 5 bar (others on request)
Cracking pressure of differential 20 bar (others on request)
pressure controlled relief valve NOTE:
On request, BN4HC elements
(pressure stability up to 20 bar) can
also be used at lower cracking
pressures.
Symbol for hydraulic systems
DFM 160 DFM 240 DFM 280
E 7.565.1/03.12