234
E 5.999.1.0/12.10
Check Valve
Poppet Type
Cartridge – 350 bar
RVM10120-51
up to 100 l/min
up to 350 bar
The check valve RVM10120-51 is a direct-
acting, spring-loaded poppet valve.
When there is no ow through the valve,
the spring holds the poppet in the closed
position and therefore shuts off port 2 from
port 1. The valve opens when the
pressure at port 1 is higher than the
pressure at port 2 including the pressure
created by the spring force.
GENERAL
z High performance version for high cycle rate
z Main application is to prevent uncontrolled movement or creeping of loaded
cylinders and also to isolate sections of the system
z Excellent stability throughout the entire ow range
z All exposed surfaces zinc-plated and corrosion-proof
z All valve parts made of high-strength steel with hardened and ground components
to ensure minimal wear and extended service life
z Low pressure drop due to CFD optimized ow-path
z Improved water resistance, achieved by guided and dampened piston
FUNCTION
SPECIFICATIONS
Operating pressure: Max. 350 bar
Nominal ow: Max. 100 l/min
Internal leakage: 0.1 cm
3
/min at 350 bar
Cracking pressure: 0.5 bar (others on request)
Media operating temperature range: Min. -20° to max. +100°
Ambient temperature range: -20 °C to +80 °C
Operating uid: Hydraulic oil to DIN 51524 Part 1 and 2
Viscosity: 2.8 mm²/s to 800 mm²/s recommended
Filtration: Class 21/19/16 to ISO 4406 or cleaner
MTTF
d
:
150 years
Installation: No orientation restrictions
Material: Valve body: steel
Piston: hardened and
ground steel
Seals: NBR (standard)
FKM (option)
Back-up rings: PTFE
Cavity: 10120
Weight: 0.12 kg
235
E 5.999.1.0/12.10
PERFORMANCE
MODEL CODE
RVM 10120 – 51 – C – N – 05
Basic model
Check valve, metric
Cavity
10120 = 2-way cavity
Type
51 = poppet, optimized for high cycle rate
Body and ports
C = Cartridge only
Seals
N = NBR
V = FKM (optional)
Cracking pressure
05 = 0.5 bar
others on request
DIMENSIONS
CAVITY
10120
Cartridge form tools
Tool Part No.
Countersink 170418
Reamer 1014206
Measured at:
n = 34 mm
2
/s, T
oil
= 46 °C,
Flow rate l/min
Pressure drop [bar]
Standard line bodies
Code Part No. Material Ports
R10120-01X-01 395234 Steel, zinc-plated G 1/2
thru
tting depth
Standard models
Model code Part No.
RVM10120-51-C-N-0.5 3420466
40 thick
hex. SW27 (metric)
M
A = 80
+10
Nm
Millimeter
Subject to technical modications.
Seal kits
Code Part No.
Seal kit 10120FPM 3178281
Seal kit 10120NBR 3382346
HYDAC Fluidtechnik GmbH
Justus-von-Liebig-Str.
D-66280 Sulzbach/Saar
Tel: 0 68 97 /509-01
Fax: 0 68 97 /509-598
E-Mail: utec@hydac.com
NOTE
The information in this brochure relates to
the operating conditions and applications
described.
For applications and operating conditions
not described, please contact the relevant
technical department.
Subject to technical modications.
Millimeter
Subject to technical modications.
Cracking pressure: 0.5 bar
