E 5.998.0/12.10
295
WS12Z-01M-C-N-24DG
BasicModel
Option
Omission = No Option
M = Manual Override
BodyandPorts*
C = Cartridge only
SB6 = 3/4 BSP ports, steel body
SS12 = SAE-12 ports, steel body
AB6 = 3/4 BSP ports, aluminium body
AS12 = SAE-12 ports, aluminium body
Seals
N = NBR
V = FKM
CoilVoltage
DC
10 = 10 V DC
12 = 12 V DC
24 = 24 V DC
36 = 36 V DC
48 = 48 V DC
110 = 110 V DC available with DG termination only
AC (internally full wave rectied)
24 = 24 V AC
115 = 115 V AC
230 = 230 V AC
CoilConnector
DC: DG = DIN Connector (DIN 43650)
DS = Dual Spade SAEJ858a
DL = Leadwires (2) - 457mm (18") long
DW = Weather Pack Connector on leadwires - 241 mm (9.5") long
DK = Kostal connector
DT = 2-pole AMP Junior Timer plug
AC: AG = DIN Connector (DIN 43650)
Pressure drop
Flow rate
millimeter (inch)
technical modications reserved
FC12-2
Formtools
Tool PartNo
Rougher FC12-2 in preparation
Finisher FC12-2 in preparation
millimeter (inch)
technical modications reserved
Measured at n = 34 mm²/s
T
Oil
= 46 °C
*StandardLineBodies
Code PartNo Material Ports Pressure
FH122-SB6 3053782 Steel, zinc-plated 3/4 BSP 420 bar
FH122-SS12 3053772 Steel, zinc-plated SAE-12 420 bar
FH122-AB6 3053843 Aluminium, clear anodized 3/4 BSP 245 bar
FH122-AS12 3053845 Aluminium, clear anodized SAE-12 245 bar
HYDACFluidtechnikGmbH
Justus-von-Liebig-Str.
D-66280Sulzbach/Saar
Tel: 0 68 97 /509-01
Telefax. 0 68 97 /509-598
E-Mail: utec@hydac.com
The information in this brochure
relates to the operating conditions
and applications described.
For applications or operating
conditions not described, please
contact the relevant technical
department.
Subject to technical modications.
NOTE
Standardmodels
Modelcode Stockno.
WS12Z-01-C-N-24DG 3157866
WS12Z-01-C-N-230AG 3157865
1 ¼ hex torque 100
±8
Nm
Manual override, Option 'M'
After loosening mounting nut,
coil can be rotated through 360°
and removed.
thick
without M.O.
torque 4
+2
Nm
torque 4
+2
Nm
After removing mounting
nut, manual operation
is possible by twisting
button anticlockwise.