E 5.992.0/12.10
342
Solenoid Directional Valve
SAE 8-Cartridge - 350 bar
2/2 Normally Open
Screen Filter
WS08Y-30
Poppet Type - Pilot Operated
30 l/min
350 bar
In the de-energized mode, the valve
allows ow from 2 to 1. Flow from 1 to 2
is severely restricted in this mode.
When energized, the valve blocks ow
from 2 to 1. In this mode the valve will
allow ow from 1 to 2 after the hydraulic
force overcomes the solenoid force of 9
to 20 bar.
FEATURES
Excellent switching performance by high power HYDAC solenoid
All valve parts made of high-strength steel with hardened and ground
components to ensure minimal wear and to extend service life
Rigid design using one-piece body minimizes the effect of eccentricity and
maximizes reliability
All surfaces zinc-plated and corrosion-proof
Waterproof design standard
Wide variety of connectors available
Low pressure drop by CFD optimized ow-path
Internal valve parts protected against coarse contaminant particles by screen lter
FUNCTION
SpECIFICATIONS
Operating pressure: 350 bar
Nominal ow: 30 l/min
Internal leckage: leakfree (less than 5 drops/min) at 350 bar
Media operating temp. range: -20 °C to +120 °C
Ambient temp. range: -20 °C to +60 °C
Coil duty rating: Continuous from 85% to 115% of
nominal voltage
Current draw at 20 °C: 1.5 amps at 12 V DC
0.8 amps at 24 V DC
Minimum pull-in voltage: 85 % of nominal
Response time: Energized: 50 ms
De-energized: 35 ms
typical 24 V DC-coil
Fluids: Mineral-based or synthetics with
lubricating properties
Viscosity: 7.4 to 420 cSt
Filtration: Class 21/19/16 according to ISO 4406
or cleaner
Screen lter: 300 µm mesh size
Installation: No orientation restrictions
Material: Valve
body: carbon steel
Piston: carbon steel
Seals: NBR (standard)
FKM (optional)
Coil: Steel/Polyamide
Cavity: FC08-2
Weights: Valve complete: 330 g
Coil only: 190 g
E 5.992.0/12.10
343
pERFORMANCE
MODEL CODE
WS08Y-30 M-C-N-24 DG
BasicModel
with screen lter
Option
Omission = No Option
M = Manual Override
Body&Ports*
C = Cartridge only
SB3 = 3/8 BSP ports, steel body
SS6 = SAE-6 ports, steel body
AB3 = 3/8 BSP ports, aluminium body
AS6 = SAE-6 ports, aluminium body
Seals
N = NBR
V = FKM
CoilVoltage
DC
10 = 10 V DC
12 = 12 V DC
24 = 24 V DC
36 = 36 V DC
48 = 48 V DC
110 = 110 V DC available with DG termination only
AC (internally full wave rectied)
24 = 24 V AC
115 = 115 V AC
230 = 230 V AC
CoilConnector
DC: DG = DIN Connector (DIN 43650)
DS = Dual Spade SAEJ858a
DL = Leadwires (2) - 457 mm (18") long
DW = Weather Pack Connector on leadwires - 241 mm (9.5") long
DK = Kostal connector
DT = 2-pole AMP Junior Timer plug
AC: AG = DIN Connector (DIN 43650)
DIMENSIONS
Pressure drop
Flow rate
CAVITY
FC08-2
Formtools
Tools Stockno.
Rougher FC08-2 175473
Finisher FC08-2 175474
measured at n = 33 mm²/s
T
oil
= 46 °C
*StandardLineBodies:
Code Stockno. Material Ports Pressure
FH082-SB3 560919 Steel, zinc-plated 3/8 BSP 420 bar
FH082-SS6 560917 Steel, zinc-plated SAE-6 420 bar
FH082-AB3 3011423 Aluminium, clear anodized 3/8 BSP 245 bar
FH082-AS6 3011409 Aluminium, clear anodized SAE-6 245 bar
Subject to technical
modications
Standardmodels
Modelcode Stockno.
WS08Y-30-C-N-24DG 3132862
WS08Y-30-C-N-230AG 3132863
HYDACFluidtechnikGmbH
Justus-von-Liebig-Str.
D-66280Sulzbach/Saar
Tel: 0 68 97 /509-01
Telefax. 0 68 97 /509-598
E-Mail: utec@hydac.com
The information in this brochure
relates to the operating conditions and
applications described. For applications
or operating conditions not described,
please contact the relevant technical
department.
Subject to technical modications.
NOTE
After loosening mounting nut,
coil can be rotated through
360° and removed.
Subject to technical
modications
Manual override
with HNBR-rubber cap
torque 4
+2
Nm
without M.O.
7/8 Hex
torque 25
+5
Nm
thick
de-energized
