E 5.983.0/12.10
284
Solenoid Directional Valve
SAE 08-Cartridge – 350 bar
2/2-Normally Closed
WS08Z-01J
Poppet Type - Pilot Operated
Spring-Return Manual Override
38 l/min
350 bar
In the de-energized mode, the valve
blocks ow from 2 to 1 and acts as a
check allowing ow from 1 to 2.
When energized, the valve allows ow
from 2 to 1.
Flow from 1 to 2 is severely restricted in
this mode.

Wet armature solenoid
Wide voltage tolerance
All valve parts made of high-strength steel with hardened and ground
components to ensure minimal wear and to extend service life
All surfaces zinc-plated and corrosion-proof
Waterproof design standard
Wide variety of coils and connectors available
One piece body design


Operating pressure: 350 bar
Proof pressure: 520 bar
Flow: 38 l/min
Internal leakage: leakfree (less than 5 drops/min)
max. at 350 bar
Media operating temp. range: - 20 °C to + 120 °C
Ambient temp. range: - 20 °C to + 60 °C
Coil duty rating: Continuous from 85 % to 115 %
of nominal voltage
Current draw at 20 °C: 1.5 A at 12 V DC
0.8 A at 24 V DC
Minimum pull-in voltage: 85 % of nominal
Manual override: The pull force required is dependent
on the operating pressure max.
approx. 150 N
The max. permissible pull force is 180 N
Response time: Energized: 35 ms
De-energized: 50 ms
typical 24 V DC-coil
Fluids: Mineral-based or synthetics with
lubricating properties
Viscosity: 7.4 to 420 cSt
Filtration: Class 21/19/16 according
to ISO 4406 or cleaner
Installation: No orientation restrictions
Material: Valve body: carbon steel
Piston: carbon steel
Seals: NBR (Standard)
FKM (Option)
Coil: Steel/Polyamide
Cavity FC08-2
Weights: Valve complete: 360 g
Coil only: 190 g
E 5.983.0/12.10
285

WS08Z-01J-C-N-24DG
BasicModel
ManualOverride
J = Pull Type,
Spring-Return Manual Override
BodyandPorts*
C = Cartridge Only
SB3 = 3/8 BSP ports, steel body
SS6 = SAE-6 ports, steel body
AB3 = 3/8 BSP ports, aluminium body
AS6 = SAE-6 ports, aluminium body
Seals
N = NBR
V = FKM
CoilVoltage
DC
10 = 10 V DC
12 = 12 V DC
24 = 24 V DC
36 = 36 V DC
48 = 48 V DC
110 = 110 V DC available with DG termination only
AC (internally full wave rectied)
24 = 24 V AC
115 = 115 V AC
230 = 230 V AC
CoilConnector
DC: DG = DIN Connector (DIN 43650)
DS = Dual Spade SAEJ858a
DL = Leadwires (2) - 457mm (18") long
DW = Weather Pack Connector on leadwires - 241 mm (9.5") long
DK = Kostal connector
DT = 2-pole AMP Junior Timer plug
AC: AG = DIN Connector (DIN 43650)

FC08-2

Formtools
Tool PartNo
Rougher FC08-2 175473
Finisher FC08-2 175474

Pressure drop
Flow rate
*StandardLineBodies
Code PartNo Material Ports Pressure
FH082-SB3 560919 Steel, zinc-plated 3/8 BSP 420 bar
FH082-SS6 560917 Steel, zinc-plated SAE-6 420 bar
FH082-AB3 3011423 Aluminium, clear anodized 3/8 BSP 245 bar
FH082-AS6 3011409 Aluminium, clear anodized SAE-6 245 bar
millimeter (inch)
Subject to technical modications.
millimeter (inch)
Subject to technical modications.
1 hex torque 5
+2
Nm
After loosening mounting
nut, coil can be rotated
through 360° and removed.
7/8 hex
torque 25
+5
Nm
Manual override,
spring return
pull and hold to operate
thick
without M.O.
Standardmodels
Modelcode Stockno.
WS08Z-01J-C-N-24DG 3122463
WS08Z-01J-C-N-230AG 3122464
HYDACFluidtechnikGmbH
Justus-von-Liebig-Str.
D-66280Sulzbach/Saar
Tel: 0 68 97 /509-01
Telefax. 0 68 97 /509-598
E-Mail: utec@hydac.com
The information in this brochure
relates to the operating conditions
and applications described.
For applications or operating
conditions not described, please
contact the relevant technical
department.
Subject to technical modications.
NOTE
Measured at n = 34 mm²/s
T
Oil
= 46 °C
1 -> 2 de-energized
2 -> 1 energized
through
override stroke
Hand-knob
Part No. 6019472
ordered separately