E 5.982.0/12.10
135
PerFormance
model code
DR10P-01-C-N-180V100
BasicModel
BodyandPorts*
C = Cartridge only
SB4 = 1/2 BSP ports, steel body
SS8 = SAE-8 ports, steel body
AB4 = 1/2 BSP ports, aluminium body
AS8 = SAE-8 ports, aluminium body
Seals
N = NBR
V = FKM
Springrange
050 = up to 35 bar
090 = up to 62 bar
180 = up to 124 bar
330 = up to 228 bar
500 = up to 345 bar
Adjustmentoption
V = Allen head (HEX 5/32")
H = Knob adjustment
F = Factory preset, non adjustable
K = Allen head (HEX 5/32") with cover cap
Setting
Model code = desired psi ÷ 10
caVitY
FC10-3
dimensions
Regulating Pressure
Measured at 34 cSt
T
oil
= 46 °C
Millimeters (inch)
Subject to technical modi-
cations reserved
Formtools
Tool PartNo
Rougher FC10-3 in preparation
Finisher FC10-3 in preparation
Millimeters (inch)
Subject technical modica-
tions reserved
*StandardLineBodies
Code PartNo Material Ports Pressure
FH103-SB4 3037697 Steel, zinc-plated 1/2 BSP 420 bar
FH103-SS8 3037704 Steel, zinc-plated SAE-8 420 bar
FH103-AB4 3038092 Aluminium, clear anodized 1/2 BSP 245 bar
FH103-AS8 3038095 Aluminium, clear anodized SAE-8 245 bar
Flow rate
HYDACFluidtechnikGmbH
Justus-von-Liebig-Str.
D-66280Sulzbach/Saar
Tel: 0 68 97 /509-01
Telefax. 0 68 97 /509-598
E-Mail: utec@hydac.com
NOTE
The information in this brochure relates to the
operating conditions and applications descri-
bed. For applications or operating conditions
not described, please contact the relevant
technical department.
Subject to technical modications.
torque 40-50 Nm
(29,5 - 37 ft-lbs)
thick