E 5.977.2.0/12.10
380
3/2 Solenoid Directional Valve
Metric Cartridge – 350 bar
WSM08130C
Poppet Type - Direct Acting
up to 22 l/min
up to 350 bar
When the solenoid coil is not energized,
there is free ow through the valve from
port 2 to port 3. Port 1 is closed.
When the solenoid coil is energized, port
3 is closed. There is free ow through
the valve from port 1 to port 2.
Features
Exposed surfaces zinc-plated and corrosion-proof
All valve parts made of high-strength steel with hardened and ground
components to ensure minimal wear and extended service life
Coil seals protect the solenoid system
Wide variety of coils and connectors available
Excellent switching performance by high power HYDAC solenoid
FuNCtION
sPeCIFICatIONs
Operating pressure: max. 350 bar
Nominal ow: max. 22 l/min
Internal leakage: leakage-free (max. 5 drops/min at 350 bar)
Media operating temperature range: min. -20 °C to max. +100 °C
Ambient temperature range: min. -20 °C to max. +60 °C
Fluids: Hydraulic oil to DIN 51524 Part 1 and 2
Viscosity: min 7.4 mm²/s to max. 420 mm²/s
Filtration: Class 21/19/16 according to
ISO 4406 or cleaner
Installation: no orientation restrictions
Material: Valve body: high tensile steel
Closing elements: hardened and
ground steel
Seals: NBR (standard)
FKM (optional)
Back-up rings: PTFE
Cavity: 08130 metric
Weights: Valve complete: 0.49 kg
Coil only: 0.19 kg
Electrics
Response time: Energized: approx. 30 ms
De-energized: approx. 20 ms
typical 24 V DC-coil
Type of voltage: DC solenoid,AC voltage is rectied
using a bridge rectier built into the coil
Current draw at 20 °C: 2.22 A at 12 V DC
1.13 A at 24 V DC
Voltage tolerance: ±15% of nominal
Coil duty rating: Continuous up to 115%
of nominal voltage at max. 60 °C
ambient temperature
E 5.977.2.0/12.10
381
PerFOrmaNCe
mODeL CODe
WSM08130C - 01 - C - N - 24 DG
Basic model
Directional poppet valve,
metric cavity, Function code C
Type
01 = standard
Body and Ports*
C = Cartridge only
Seals
N = NBR (standard)
V = FKM (optional)
Coil voltage
DC: 12 = 12 V DC
24 = 24 V DC
AC: 115 = 115 V AC (internally full wave rectied)
230 = 230 V AC (internally full wave rectied)
other voltages on request
Coil connectors
DC: DG = DIN connector to EN175301-803
DT = AMP Junior Timer, 2 pole, radial
DK = Kostal threaded connector M27 x 1
DL = Leadwires (2) - 475mm (18") long
DN = Deutsch connector, 2 pole
AC: AG = DIN connector to EN175301-803
other connection types on request
DImeNsIONs
Pressure drop [bar]
Flow rate [l/min]
CaVItY
Metric 08130
Form tools
Tool Part No.
Countersink (MK3) 169265
Reamer (MK2) 163639
Subject to technical modications
Measured at ν = 33 mm
2
/s
T
Oil
= 46 °C
* Standard line bodies
Code Part No. Material Ports Pressure
R08130-01X-01 394488 Steel, zinc-plated G 3/8 350 bar
R08130-01X-02 394378 Steel, zinc-plated M14 x 1.5 350 bar
Subject to technical modications
Standard models
Model code Part No.
WSM08130C-01-C-N-12DG 3374096
WSM08130C-01-C-N-24DG 3374097
WSM08130C-01-C-N-230AG 3374098
HYDAC Fluidtechnik GmbH
Justus-von-Liebig-Str.
D-66280 Sulzbach/Saar
Tel: 0 68 97 /509-01
Fax: 0 68 97 /509-598
E-Mail: utec@hydac.com
NOTE
The information in this brochure relates to
the operating conditions and applications
described.
For applications or operating conditions
not described, please contact the relevant
technical department.
Subject to technical modications.
Other models on request
Other connection housings on request
Torque 4
+2
Nm
After loosening the
mounting nut, the coil
can be turned through
360° and removed
SW24 hex.
Torque 25
+5
Nm
tting depth
tting depth
Seal kits
Code Part No.
Seal kit 08130 NBR 3164596
Seal kit 08130 FKM 3183746
