E 5.976.1/12.10
418
3/2 Directional Spool Valve
Solenoid Actuated,
Direct Operated
Cartridge Valve - 350 bar
WKM08130C-01
Up to 25 l/min
Up to 350 bar
When the solenoid coil is not energized,
there is free ow through the valve from
port 2 to 1 or from 1 to 2, while port 3 is
closed.
When the solenoid coil is energized,
there is free ow through the valve from
port 3 to 2 or from 2 to 3, while port 1 is
closed.
GENERAL
Oil-immersed solenoid armature for long life and low noise operation.
Solenoid operation for all common international AC and DC voltages and
available with many electrical connection types.
Minimal wear and long life due to hardened and polished control spools.
Solenoid coils can be rotated through 360° and replaced with no possibility of oil
leakage.
Surfaces are zinc-plated.
Built-in seals protect solenoid coil from water penetration.
Compact construction enables space-saving installation in connection housings
and control blocks.
FUNCTION
SpECIFICATIONS
Operating pressure: Max. 350 bar
Flow rate: Max. 25 l/min
Internal leakage: Max. 150 cm³/min at 250 bar
Temperature range of operating uid: -20 °C up to + 120 °C
Ambient temperature range: -20 °C up to + 60 °C
Type of voltage: DC solenoid, AC voltage is rectied
using a bridge rectier built into the coil
Nominal voltage at 20 °C: 1.5 A at 12 V DC
0.8 A at 24 V DC
Voltage tolerance: -15% up to +15%
Duty cycle: 100% (continuous)
Switching time: On: approx. 40 ms
Off: approx. 30 ms
Operating uid: Hydraulic oil to DIN 51524
Part 1 and 2
Viscosity range: 10 mm²/s to 420 mm²/s is recommended
Filtration: Max. permissible contamination level
of the operating uid to ISO 4406
Class 21/19/16
Mounting position: Optional
Materials: Valve body: high tensile steel
Spool: hardened and polished steel
Seals: NBR (standard)
FKM (optional)
Back-up rings in PTFE
Cavity: 08130
Weight: Valve complete: 0.37 kg
Coil only: 0.19 kg
E 5.976.1/12.10
419
pRESSURE DROp
MODEL CODE
WKM08130C-01M-C-N-24DG
Designation
(Directional spool valve, metric)
Cavity
08130 = 3-way cavity
Functioncode
Type
01 = standard model
Manualoverride
No details = without manual override
M = manual override
Typeofconnection
C = cartridge valve
Seals
N = NBR
V = FKM
Nominalvoltageforactuatingsolenoid
DC voltages
10 = 10 V DC
12 = 12 V DC
24 = 24 V DC
36 = 36 V DC
48 = 48 V DC
110 = 110 V DC only with plug to DIN 43650
AC Voltages (bridge rectier built into the coil)
24 = 24 V AC
115 = 115 V AC
230 = 230 V AC
Other voltages on request
Electricalconnectiontypesoftheactuatingsolenoid
DC: DG = plug to DIN 43650
DL = with 2 ying leads, 457 mm long
0.75 mm² cable cross-section
DW = Weather Pack plug no. 12010973 on 2 leads, 241 mm long
DT = AMP Junior Timer, 2-pole, radial
DK = KOSTAL threaded connection M27x1
AC: AG = plug to DIN 43650
Other connection types on request
DIMENSIONS
Pressure drop
Flow rate
CAVITY
08130
Cartridgeformtools
Tools Stockno.
Countersink (shank MK3) 169265
Reamer (shank MK2) 163639
measured at ν = 33 mm²/s
T
oil
= 46 °C
Inlineconnectionhousings
Code Stockno. Material Ports
R08130-01X-01 394488 Steel, zinc-plated G 3/8
R08130-01X-02 394378 Steel, zinc-plated M 14x1.5
Subject to technical
modications
OpERATING LIMITS
operating pressure
ow rate
ν = 34 mm²/s, T
oil
= 46 °C
Standardmodels
Modelcode Stockno.
WKM08130C-01-C-N-24DG 3115602
WKM08130C-01-C-N-230AG 3115603
HYDACFluidtechnikGmbH
Justus-von-Liebig-Str.
D-66280Sulzbach/Saar
Tel: 0 68 97 /509-01
Telefax. 0 68 97 /509-598
E-Mail: utec@hydac.com
The information in this brochure
relates to the operating conditions and
applications described. For applications
or operating conditions not described,
please contact the relevant technical
department.
Subject to technical modications.
NOTE
After loosening knurled nut,
coil can be rotated through
360° and removed.
Manual override, with HNBR rubber cap
torque 4
+2
Nm
hex. SW24
torque 25
+5
Nm
Subject to technical
modications
tting depth
tting depth