E 5.962.1/12.10
460
4/2-Solenoid Directional Valve
SAE 10-Cartridge - 350 bar
WK10R-01
SPOOL Type - Direct Operated
32 l/min
350 bar
In the de-energized mode, the valve
allows ow from port 3 to 4 or 4 to 3 and
from port 2 to 1 or 1 to 2.
When energized, the valve allows ow
from port 1 to 4 or 4 to 1 while blocking
ow at 3 and 2.
Features
All surfaces zinc-plated and corrosion-proof
All valve parts made of high-strength steel with hardened and ground
components to ensure minimal wear and extended service life
Coil seals protect the solenoid system
Wide variety of connectors available
Rigid design using one-piece body minimizes the effect of eccentricities in cavity
and maximizes reliability
Excellent switching performance by high power HYDAC solenoid
Low pressure drop due to CFD optimized ow-path
Function
speciFications
Operating pressure: 350 bar
Nominal ow: 32 l/min
Internal leakage: 160 cm³/min max at 250 bar and 34 mm
2
/s
Media operating temperature range: -20 °C to +120 °C
Ambient temperature range: -20 °C to +60 °C
Fluids: Hydraulic oil to DIN 51524 part 1 and 2
Viscosity: 7.4 to 420 mm
2
/s
Filtration: Class 21/19/16 according to ISO 4406
or cleaner
Material: Valve body: carbon steel
Spool: hardened and ground
steel
Seals: NBR (standard)
FKM (optional)
Coil: Steel/Polyamide
Cavity: FC10-4
Weights: Valve complete: 0.48 kg
Coil only: 0.23 kg
Type of voltage DC solenoid, AC voltage is rectied
using a bridge rectier built into the coil
Current draw at 20 °C (68 °F): 2.22 A at 12 V DC
1.13 A at 24 V DC
Minimum pull-in voltage: 85 % of nominal
Coil duty rating: Continuous up to 115% of nominal
voltage at 60 °C ambient temperature
E 5.962.1/12.10
461
Model code
WK10R-01M-C-N-24DG
Basicmodel
Directional spool valve UNF
Cavity 10
Function code R
Type 01 = standard
Option
Omission = No Option
M = Manual Override
Body&Ports
C = Cartridge only
SB4 = 1/2 BSP ports, steel body
AB4 = 1/2 BSP ports, aluminium body
Seals
N = NBR
V = FKM
CoilVoltage
DC
12 = 12 V DC
24 = 24 V DC
AC (internally full wave rectied)
24 = 24 V AC
230 = 230 V AC
CoilConnector
DC: DG = DIN Connector to EN 175301-803
DK = Kostal threaded connection M27x1
DL = Leadwires (2) - 457mm, (18") long
DN = Deutsch connector, 2 pole
DT = AMP Junior Timer, 2-pole, radial
AC: AG = DIN Connector to EN 175301-803
other connection types on request
diMensions
ow
Inlineconnectionhousings
Code PartNo. Material Ports Pressure
FH104-SB4 3037784 Steel, zinc-plated 1/2 BSP 350 bar
FH104-AB4 3038097 Aluminium, clear anodized 1/2 BSP 245 bar
millimeter (inch)
Subject to technical modications
cavity
FC10-4
Formtools
Tool PartNo.
Rougher FC10-4 176174
Finisher FC10-4 176175
Manual Override, Option 'M'
with HNBR-Rubber Cap
thick
After loosening mounting nut,
coil can be rotated through
360° and removed
Standardmodels
Modelcode PartNo.
WK10R-01-C-N-24DG 3097259
WK10R-01-C-N-230AG 3097260
Torque 4
+2
Nm
whithout M.O.
25.5 (1) Hex Torque 45
+10
Nm
operating liMits
measured at ν = 34 mm
2
/s, T
Oil
= 46 °C
operating pressure
millimeter (inch)
Subject to technical modications
perForMance
pressure drop
ow rate
measured at ν = 34 mm
2
/s, T
Oil
= 46 °C
other models on request
other housings on request
HYDACFluidtechnikGmbH
Justus-von-Liebig-Str.
D-66280Sulzbach/Saar
Tel: 0 68 97 /509-01
Fax. 0 68 97 /509-598
E-Mail: utec@hydac.com
NOTE
The information in this brochure relates to
the operating conditions and applications
described. For applications or operating
conditions not described, please contact the
relevant technical department.
Subject to technical modications.