E 5.948.3.0/12.10
302
2/2 Solenoid Directional Valve
Poppet Type - Pilot Operated
Normally Closed
Metric Cartridge Valve - 350 bar
WSM12120Z
up to 110 l/min
up to 350 bar
In the de-energized mode, the valve is
closed from port 2 to port 1.
In the reverse direction there is free ow
through the valve. The valve opens at
a differential pressure of approx. 1.5 bar
(check function).
When energized, there is free ow
through the valve from port 2 to port 1.
Flow in the reverse direction is severely
restricted.
GENERAL
All surfaces zinc-plated and corrosion-proof.
Minimal wear and long service life due to hardened and ground valve compon-
ents.
Coil seals protect the solenoid system
Wide variety of connectors available
Rigid design using one-piece body minimises the effect of eccentricities in cavity
and maximises reliability.
Excellent switching performance by high power Hydac solenoid.
Low pressure drop due to CFD optimised ow-path.
FuNctioN
SPEciFicAtioNS
Operating pressure: max. 350 bar
Nominal ow: max. 110 l/min
Internal leakage: leakage-free
Media operating temp. range: min. -20 °C to max. +120 °C
Ambient temperature range: min. -20 °C to max. +60 °C
Operating uid: hydraulic oil to DIN 51524 Part 1 and 2
Viscosity range: min 7.4 mm²/s to max. 420 mm²/s
Filtration: max. permissible contamination level
of the operating uid to ISO 4406
Class 21/19/16 or cleaner
Installation: optional
Materials: valve body: high tensile steel
piston: hardened and ground
steel
seals: NBR (standard)
FKM (optional)
back-up rings: PTFE
Cavity: 12120
Weight: Valve complete: 0.46 kg
Coil only: 0.19 kg
Response time: on: approx. 35 ms
off: approx. 70 ms
Type of voltage: DC solenoid, AC voltage is rectied
using a bridge rectier built into the coil
Current draw at 20 °C: 1.5 A at 12 V DC
0.8 A at 24 V DC
Voltage tolerance: ±15% of nominal voltage
Switch-on time: 100% (continuous) up to max. 115% of
the nominal voltage at 60°C ambient
temperature