E 5.917.2/12.10
328
Solenoid Directional Valve
SAE 8-Cartridge - 350 bar
2/2-Normally Open
WS08Y-01
Poppet Type - Pilot Operated
38 l/min
350 bar
In the de-energized mode, the valve
allows ow from port 2 to 1. Flow from
1 to 2 is severely restricted in this mode.
When energized, the valve blocks ow
from port 2 to 1. In this mode the valve
will allow ow from 1 to 2 once the
hydraulic force exceeds the solenoid
force of 9 to 20 bar.
All surfaces zinc-plated and corrosion-proof
All valve parts made of high-strength steel with hardened and ground
components to ensure minimal wear and extended service life
Coil seals protect the solenoid system
Wide variety of connectors available
Rigid design using one-piece body minimizes the effect of eccentricities in cavity
and maximizes reliability
Excellent switching performance by high power HYDAC solenoid
Low pressure drop due to CFD optimized ow-path
Operating pressure: 350 bar
Proof pressure: 520 bar
Nominal ow: 38 l/min
Internal leakage: leakage-free (less than 5 drops/min)
max. at 350 bar
Media operating temp. range: - 20 °C to + 120 °C
Ambient temp. range: - 20 °C to + 60 °C
Fluids: Hydraulic oil to DIN 51524 Part 1 and 2
Viscosity: 7.4 to 420 mm
2
/s
Filtration: Class 21/19/16 according
to ISO 4406 or cleaner
Installation: No orientation restrictions
Material: Valve body: high tensile steel
Piston: hardened and
ground steel
Seals: NBR (Standard)
FKM (Option)
Coil: Steel/Polyamide
Cavity: FC08-2
Weights: Valve complete: 0.33 kg
Coil only: 0.19 kg
Response time: Energized: 50 ms
De-energized: 35 ms
typical 24 V DC-coil
Type of voltage DC solenoid, AC voltage is recied by a
bridge rectier built into the coil
Current draw at 20 °C: 1.5 A at 12 V DC
0.8 A at 24 V DC
Voltage tolerance: ± 15 % of nominal voltage
Switch-on time: Continuous up to 115 %
of nominal voltage at 60 °C
ambient temperature