E 5.913.2/12.10

404

3/2-Solenoid

Directional Valve

SAE 8-Cartridge - 350 bar

WK08L-01

SPOOL Type - Direct Operated

17 l/min

350 bar

In the de-energized mode, the valve

allows ow bidirectionally between ports

1 & 2, while blocking at port 3.

When energized, the valve allows ow

bidirectionally between ports 1 & 3, while

blocking at port 2.



 All surfaces zinc-plated and corrosion-proof

 All valve parts made of high-strength steel with hardened and ground compon-

ents to ensure minimal wear and extended service life

 Coil seals protect the solenoid system

 Wide variety of connectors available

 Rigid design using one-piece body minimizes the effect of eccentricities in cavity

and maximizes reliability

 Excellent switching performance by high power HYDAC solenoid

 Low pressure drop due to CFD optimized ow-path





Operating pressure: 350 bar

Proof pressure: 520 bar

Nominal ow: 17 l/min

Consult factory for ow ratings above

207 bar

Internal leakage: 90 cm³/min max

at 250 bar and 34 mm²/s

Media operating temp. range: -20 °C to +120 °C

Ambient temp. range: -20 °C to +60 °C

Fluids: Hydraulic oil to DIN 51524 Part 1 and 2

Viscosity: 7.4 to 420 mm²/s

Filtration: Class 21/19/16 according to

ISO 4406 or cleaner

Material: Valve body: high tensile steel

Spool: hardened and

ground steel

Seals: NBR (standard)

FKM (optional)

Coil: Steel/Polyamide

Cavity: FC08-3

Weights: Valve complete: 0.37 kg

Coil only: 0.19 kg

Type of voltage DC solenoid, AC voltage is rectied by a

built-in rectier built into the coil

Current draw at 20 °C: 1.5 A at 12 V DC

0.8 A at 24 V DC

Voltage tolerance ± 15 % of nominal voltage

Switch-on time Continuous up to 115 % of

nominal voltage at 60 °C

ambient temperature

E 5.913.2/12.10

405





 WK08L-01M-C-N-24DG

Designation

Directional spool valve UNF

Cavity 08

Function code L

Type 01 = standard

Option

Omission = No Option

M = Manual Override

BodyandPorts*

C = Cartridge Only

SB3 = 3/8 BSP ports, steel body

AB3 = 3/8 BSP ports, aluminium body

Seals

N = NBR

V = FKM

CoilVoltage

12 = 12 V DC

24 = 24 V DC

AC (internally full wave rectied)

115 = 115 V AC

230 = 230 V AC

other voltages on request

CoilConnector

DC: DG = DIN Connector to EN 175301-803

DK = Kostal connector

DL = Leadwires (2) - 457mm (18") long

DN = Deutsch connector 2-pole

DT = 2-pole AMP Junior Timer plug

AC: AG = DIN Connector to EN 175301-803

other connectors on request



Pressure drop

Flow rate

*Inlineconnectionhousings

Code Partno.Material Ports Pressure

FH083-SB3 560922 Steel, zinc-plated 3/8 BSP 420 bar

FH083-AB3 3011427 Aluminium, clear anodized 3/8 BSP 245 bar

other housings on request

millimeter (inch)

technical modications reserved



FC08-3

Formtools

Tool PartNo

Rougher FC08-3 175644

Finisher FC08-3 175645

millimeter (inch)

technical modications reserved

Standardmodels

Modelcode   Partno.

WK08L-01-C-N-24DG 3021475

WK08L-01-C-N-230AG 3043947

other models on request

HYDACFluidtechnikGmbH

Justus-von-Liebig-Str.

D-66280Sulzbach/Saar

Tel: 0 68 97 /509-01

Fax: 0 68 97 /509-598

E-Mail: utec@hydac.com

The information in this brochure

relates to the operating conditions

and applications described.

For applications or operating

conditions not described, please

contact the relevant technical

department.

Subject to technical modications.

NOTE

After loosening

mounting nut, coil can

be rotated through 360°

and removed

7/8 hex.

torque 25

Manual override,

with HNBR-rubber cap

torque 4

thick

without M.O.

Measured at ν = 34 mm²/s

Oil

= 46 °C